Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Door Support Assembly #241778811
Frigidaire Refrigerator Door Support Assembly #241778811
Skill Level
Total Parts Cost
$193.95Estimated Savings
$112.5001:41
- Description
This video provides step-by-step repair instructions for replacing the door support on a Frigidaire refrigerator. The most common reason for replacing the mullion is if the door will not close or seal properly.
All of the information for this refrigerator mullion replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator mullion replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace your refrigerator’s mullion flipper assembly be sure to unplug the power cord.
2
Using a phillips-head screwdriver or a number two square drive bit, unthread the mounting screw securing the mullion flipper assembly.
3
Lift the assembly up to detach then disconnect the wire connecter to fully remove.
4
Install the new mullion flipper assembly by first connecting the wire connecter.
5
With the center hinge open, align the assembly on the mounting pins and push down.
6
Thread and tighten the mounting screw to secure.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the door support on a Frigidaire refrigerator. The most common reason for replacing the mullion is if the door will not close or seal properly.
All of the information for this refrigerator mullion replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator mullion replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace your refrigerator’s mullion flipper assembly be sure to unplug the power cord.
2
Using a phillips-head screwdriver or a number two square drive bit, unthread the mounting screw securing the mullion flipper assembly.
3
Lift the assembly up to detach then disconnect the wire connecter to fully remove.
4
Install the new mullion flipper assembly by first connecting the wire connecter.
5
With the center hinge open, align the assembly on the mounting pins and push down.
6
Thread and tighten the mounting screw to secure.
7
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Mullion Heater
$193.95
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com