Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Replace Icemaker Fill Tube #241920103
Frigidaire Refrigerator Replace Icemaker Fill Tube #241920103
Skill Level
Total Parts Cost
$47.20Estimated Savings
$112.5005:06
- Description
This video provides step-by-step repair instructions for replacing the icemaker fill tube on a Frigidaire refrigerator. The most common reason for replacing the tube is if the refrigerator is leaking or not creating ice cubes.
All of the information for this refrigerator tube replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
All of the information for this refrigerator tube replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
Step By Step Instructions
1
Before you replace the icemaker fill tube in your refrigerator be sure to unplug the power cord.
2
Use a small wrench to depress the locking ring to release the green icemaker fill tube from the coupler.
3
Use a quarter-inch socket or nut driver to unthread the screw to release the tube retainer.
4
Slide off the retainer.
5
Detach the tube cover as well.
6
Next, open the refrigerator door and fully remove the ice bucket.
7
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws to release the icemaker’s front cover.
8
Using a quarter-inch socket or nut driver, unthread the screw securing the wire harness cover.
9
Remove the cover.
10
Disconnect the wire connecters.
11
Pull the icemaker forward to detach.
12
Remove the shelving adjacent to the icemaker.
13
Now unthread the three mounting screws securing the icemaker housing.
14
Remove the housing and set it aside.
15
You can now push the old fill tube from the rear the pull it out from the front to remove the old tube from the cabinet.
16
Install the new icemaker fill tube by feeding it though the channel at the top of the cabinet until the flange is flush against the liner.
17
Reinstall the housing by first inserting the icemaker through the rear then feed the wires through the hole at the top.
18
Fully position the housing and secure it with the mounting screws.
19
Replace the shelving.
20
Realign the icemaker on the housing mounting studs and push back until the icemaker locks into place.
21
Reconnect the wire connecters.
22
Realign the wire harness cover and secure it with the screw.
23
Reposition the front cover then rethread and tighten the screws to secure.
24
Replace the ice bucket.
25
Now fully insert the icemaker fill tube in the coupler.
26
Align the tubes in the retainer and secure the retainer to the rear panel with the screw.
27
Replace the tube cover and rethread the screw to secure.
28
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the icemaker fill tube on a Frigidaire refrigerator. The most common reason for replacing the tube is if the refrigerator is leaking or not creating ice cubes.
All of the information for this refrigerator tube replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
All of the information for this refrigerator tube replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
Step-By-Step Instructions
1
Before you replace the icemaker fill tube in your refrigerator be sure to unplug the power cord.
2
Use a small wrench to depress the locking ring to release the green icemaker fill tube from the coupler.
3
Use a quarter-inch socket or nut driver to unthread the screw to release the tube retainer.
4
Slide off the retainer.
5
Detach the tube cover as well.
6
Next, open the refrigerator door and fully remove the ice bucket.
7
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws to release the icemaker’s front cover.
8
Using a quarter-inch socket or nut driver, unthread the screw securing the wire harness cover.
9
Remove the cover.
10
Disconnect the wire connecters.
11
Pull the icemaker forward to detach.
12
Remove the shelving adjacent to the icemaker.
13
Now unthread the three mounting screws securing the icemaker housing.
14
Remove the housing and set it aside.
15
You can now push the old fill tube from the rear the pull it out from the front to remove the old tube from the cabinet.
16
Install the new icemaker fill tube by feeding it though the channel at the top of the cabinet until the flange is flush against the liner.
17
Reinstall the housing by first inserting the icemaker through the rear then feed the wires through the hole at the top.
18
Fully position the housing and secure it with the mounting screws.
19
Replace the shelving.
20
Realign the icemaker on the housing mounting studs and push back until the icemaker locks into place.
21
Reconnect the wire connecters.
22
Realign the wire harness cover and secure it with the screw.
23
Reposition the front cover then rethread and tighten the screws to secure.
24
Replace the ice bucket.
25
Now fully insert the icemaker fill tube in the coupler.
26
Align the tubes in the retainer and secure the retainer to the rear panel with the screw.
27
Replace the tube cover and rethread the screw to secure.
28
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Fill Tube
$47.20
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com