Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Replace Icemaker Assembly #243297606
Frigidaire Refrigerator Replace Icemaker Assembly #243297606
Skill Level
Total Parts Cost
$96.65Estimated Savings
$112.5004:25
- Description
This video provides step-by-step repair instructions for replacing the icemaker assembly on a Frigidaire refrigerator. The most common reason for replacing the icemaker is if it is leaking or not creating ice cubes.
All of the information for this refrigerator icemaker replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
All of the information for this refrigerator icemaker replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
Step By Step Instructions
1
Before you replace the icemaker in your refrigerator be sure to unplug the power cord.
2
Your first step is to fully remove the ice bucket.
3
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws to release the icemaker’s front cover.
4
Using a quarter-inch socket or nut driver, unthread the screw securing the wire harness cover.
5
Remove the cover.
6
Disconnect the wire connecters.
7
Pull the icemaker forward to detach.
8
To make the installation process easier, we recommend completely removing the icemaker housing.
9
To do this, first remove the shelving adjacent to the housing.
10
Now unthread the three mounting screws securing the housing.
11
Pull the housing out and set it aside.
12
You can now easily cut the zip-tie wire retainers and remove the old icemaker.
13
Install the new icemaker by first aligning the wires in the channel and using zip-ties to secure.
14
Reinstall the housing by first inserting the icemaker through the rear then feed the wires through the hole at the top.
15
Fully position the housing and secure it with the mounting screws.
16
Replace the shelving.
17
Align the new icemaker on the mounting studs and push back until the icemaker locks into place.
18
Connect the wire connecters.
19
Realign the wire harness cover and secure it with the screw.
20
Reposition the front cover then rethread and tighten the screws to secure.
21
Replace the ice bucket.
22
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the icemaker assembly on a Frigidaire refrigerator. The most common reason for replacing the icemaker is if it is leaking or not creating ice cubes.
All of the information for this refrigerator icemaker replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
All of the information for this refrigerator icemaker replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver, 1/4" socket
Step-By-Step Instructions
1
Before you replace the icemaker in your refrigerator be sure to unplug the power cord.
2
Your first step is to fully remove the ice bucket.
3
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws to release the icemaker’s front cover.
4
Using a quarter-inch socket or nut driver, unthread the screw securing the wire harness cover.
5
Remove the cover.
6
Disconnect the wire connecters.
7
Pull the icemaker forward to detach.
8
To make the installation process easier, we recommend completely removing the icemaker housing.
9
To do this, first remove the shelving adjacent to the housing.
10
Now unthread the three mounting screws securing the housing.
11
Pull the housing out and set it aside.
12
You can now easily cut the zip-tie wire retainers and remove the old icemaker.
13
Install the new icemaker by first aligning the wires in the channel and using zip-ties to secure.
14
Reinstall the housing by first inserting the icemaker through the rear then feed the wires through the hole at the top.
15
Fully position the housing and secure it with the mounting screws.
16
Replace the shelving.
17
Align the new icemaker on the mounting studs and push back until the icemaker locks into place.
18
Connect the wire connecters.
19
Realign the wire harness cover and secure it with the screw.
20
Reposition the front cover then rethread and tighten the screws to secure.
21
Replace the ice bucket.
22
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Ice Maker Assembly
$96.65
Recommended Tools and Accessories
Multi Screwdriver
$59.00
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com