Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Left Deli Drawer Rail Support #242200004
Frigidaire Refrigerator Left Deli Drawer Rail Support #242200004
Skill Level
Total Parts Cost
$63.06Estimated Savings
$112.5003:00
- Description
This video provides step-by-step repair instructions for replacing the left deli drawer rail support on a Frigidaire refrigerator. The most common reason for replacing the support is if the deli drawer will not slide properly.
All of the information for this refrigerator support replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator support replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step By Step Instructions
1
Before you replace the left deli drawer rail support in your refrigerator be sure to unplug the power cord.
2
Pull the deli drawer out lift up and fully remove.
3
Next, pull both crisper drawers out and lift up to detach them from the tracks.
4
Carefully remove the lower glass shelf insert.
5
Rotate the front and rear glass support rails up to remove.
6
Lift up the front end of the old deli drawer slide rail support and pull forward to remove.
7
Prepare the new deli drawer slide rail support for installation by transferring the slide rail from the old support to the new one.
8
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws securing the rail.
9
Position the rail on the new support and thread the rear screw loosely.
10
Thread the front screw then tighten both screws.
11
Now align the rear slot on the support with the rear mounting stud slide the support back and push the front end down to secure.
12
Replace the front and rear glass shelf support rails.
13
Carefully reposition the glass shelf insert.
14
Replace the crisper drawers by aligning them on the tracks and pushing them closed.
15
Pull both deli drawer slide rails out.
16
Reinstall the deli drawer by positioning the rear of the drawer first then pull the rails forward until the drawer locks into place.
17
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left deli drawer rail support on a Frigidaire refrigerator. The most common reason for replacing the support is if the deli drawer will not slide properly.
All of the information for this refrigerator support replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
All of the information for this refrigerator support replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: phillips head screwdriver
Step-By-Step Instructions
1
Before you replace the left deli drawer rail support in your refrigerator be sure to unplug the power cord.
2
Pull the deli drawer out lift up and fully remove.
3
Next, pull both crisper drawers out and lift up to detach them from the tracks.
4
Carefully remove the lower glass shelf insert.
5
Rotate the front and rear glass support rails up to remove.
6
Lift up the front end of the old deli drawer slide rail support and pull forward to remove.
7
Prepare the new deli drawer slide rail support for installation by transferring the slide rail from the old support to the new one.
8
Use a phillips-head screwdriver or a number two square drive bit to unthread the screws securing the rail.
9
Position the rail on the new support and thread the rear screw loosely.
10
Thread the front screw then tighten both screws.
11
Now align the rear slot on the support with the rear mounting stud slide the support back and push the front end down to secure.
12
Replace the front and rear glass shelf support rails.
13
Carefully reposition the glass shelf insert.
14
Replace the crisper drawers by aligning them on the tracks and pushing them closed.
15
Pull both deli drawer slide rails out.
16
Reinstall the deli drawer by positioning the rear of the drawer first then pull the rails forward until the drawer locks into place.
17
With the repair completed plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Slide Rail
$63.06
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com