Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Refrigerator Left Freezer Drawer Slide #5303918726
Frigidaire Refrigerator Left Freezer Drawer Slide #5303918726
Skill Level
Total Parts Cost
$173.95Estimated Savings
$112.5003:44
- Description
This video provides step-by-step repair instructions for replacing the left freezer drawer slide on a Frigidaire refrigerator. The most common reason for replacing the slide is if the freezer drawer will not open or close properly.
All of the information for this refrigerator slide replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket, multi-screwdriver
All of the information for this refrigerator slide replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket, multi-screwdriver
Step By Step Instructions
1
Be sure to unplug the power cord.
2
Open the freezer drawer and use a 3/8th inch socket to unthread the screws securing the front drawer panel to the drawer rails.
3
Set the front drawer panel aside.
4
Lift out the ice bucket and basket.
5
Release the retaining clips and you can slide out the basket frame.
6
Pull out the drawer retaining clips so you can lift out the drawer assembly.
7
Use a phillips-head screwdriver or a number two square drive bit to unthread the screw securing the roller support bar.
8
Detach the bar and set it aside.
9
Unthread the screw securing the left drawer slide rail assembly.
10
Pull the assembly forward to detach it.
11
Prepare the new drawer slide rail assembly for installation by aligning an arrow on the pinion gear with the arrow on the slide then push the gear into position.
12
Align the new drawer slide rail assembly on the mounting studs and push back.
13
Thread and tighten the screw to secure.
14
Reposition the roller support bar and secure it with the screw.
15
With the slide rails pulled out, set the drawer assembly on the rails and insert the retaining clips to secure the drawer.
16
Realign the basket frame on the support rails and push back until the frame snaps into place.
17
Pull the frame forward and reposition the ice bucket and basket in the frame.
18
Reinstall the front drawer panel by hooking the mounting studs on the front of the drawer rails.
19
Thread and tighten the screws to secure. With the repair completed
20
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the left freezer drawer slide on a Frigidaire refrigerator. The most common reason for replacing the slide is if the freezer drawer will not open or close properly.
All of the information for this refrigerator slide replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket, multi-screwdriver
All of the information for this refrigerator slide replacement video is applicable to the following brands:
Arctic Air, Crosley, Electrolux, Frigidaire, Gibson, Kelvinator, Tappan, Westinghouse
Tools needed: 3/8" socket, multi-screwdriver
Step-By-Step Instructions
1
Be sure to unplug the power cord.
2
Open the freezer drawer and use a 3/8th inch socket to unthread the screws securing the front drawer panel to the drawer rails.
3
Set the front drawer panel aside.
4
Lift out the ice bucket and basket.
5
Release the retaining clips and you can slide out the basket frame.
6
Pull out the drawer retaining clips so you can lift out the drawer assembly.
7
Use a phillips-head screwdriver or a number two square drive bit to unthread the screw securing the roller support bar.
8
Detach the bar and set it aside.
9
Unthread the screw securing the left drawer slide rail assembly.
10
Pull the assembly forward to detach it.
11
Prepare the new drawer slide rail assembly for installation by aligning an arrow on the pinion gear with the arrow on the slide then push the gear into position.
12
Align the new drawer slide rail assembly on the mounting studs and push back.
13
Thread and tighten the screw to secure.
14
Reposition the roller support bar and secure it with the screw.
15
With the slide rails pulled out, set the drawer assembly on the rails and insert the retaining clips to secure the drawer.
16
Realign the basket frame on the support rails and push back until the frame snaps into place.
17
Pull the frame forward and reposition the ice bucket and basket in the frame.
18
Reinstall the front drawer panel by hooking the mounting studs on the front of the drawer rails.
19
Thread and tighten the screws to secure. With the repair completed
20
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Drawer Slide Rail
$173.95
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com