Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Wall Oven Thermal Fuse Replacement #WPW10545291
Kitchenaid Double Wall Oven Thermal Fuse Replacement #WPW10545291
Skill Level
Total Parts Cost
$37.06Estimated Savings
$112.5004:02
- Description
This video provides step-by-step repair instructions for replacing the thermal fuse on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the fuse is if the oven will not heat at all.
All of the information for this thermal fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this thermal fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step By Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Thermal Fuse Replacement
3
Tools needed: Phillips-head screwdriver, needle-nose pliers
4
Shock
5
Be sure to shut off the power to the oven junction box.
6
Open the oven doors so you can use a Phillips-head screwdriver to unthread the four screws securing the wall oven frame to the cabinet.
7
Heavy
8
Have an assistant help you to slide the appliance forward approximately four inches.
9
Now use the Phillips-head screwdriver or a quarter-inch nut driver to unthread the screws to release the two control panel mounting brackets.
10
Next, remove the four screws securing the panel assembly itself.
11
Sharp
12
Lift the control panel assembly up to detach.
13
Disconnect the communication wire as well as the grounding wire to fully remove the assembly.
14
Use needle-nose pliers to help disconnect the two wire connecters from the thermal fuse.
15
Release the two mounting studs from the support bracket to fully remove the old fuse.
16
Install the new thermal fuse by snapping the mounting studs into the holes in the mounting bracket.
17
Connect the wire connecters to the appropriate terminals.
18
Reinstall the control panel assembly by first connecting the communication wire to the user interface board and the grounding wire to the grounding tab.
19
Now realign the panel assembly on the frame, then thread and tighten the four screws to secure.
20
Realign the mounting brackets and secure them with the screws.
21
Push the wall oven back into the cabinet.
22
Confirm that the side trim pieces are in place, then thread the screws to secure the frame to the cabinet.
23
With the repair completed, turn the power supply back on and the double wall oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the thermal fuse on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the fuse is if the oven will not heat at all.
All of the information for this thermal fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this thermal fuse replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Thermal Fuse Replacement
3
Tools needed: Phillips-head screwdriver, needle-nose pliers
4
Shock
5
Be sure to shut off the power to the oven junction box.
6
Open the oven doors so you can use a Phillips-head screwdriver to unthread the four screws securing the wall oven frame to the cabinet.
7
Heavy
8
Have an assistant help you to slide the appliance forward approximately four inches.
9
Now use the Phillips-head screwdriver or a quarter-inch nut driver to unthread the screws to release the two control panel mounting brackets.
10
Next, remove the four screws securing the panel assembly itself.
11
Sharp
12
Lift the control panel assembly up to detach.
13
Disconnect the communication wire as well as the grounding wire to fully remove the assembly.
14
Use needle-nose pliers to help disconnect the two wire connecters from the thermal fuse.
15
Release the two mounting studs from the support bracket to fully remove the old fuse.
16
Install the new thermal fuse by snapping the mounting studs into the holes in the mounting bracket.
17
Connect the wire connecters to the appropriate terminals.
18
Reinstall the control panel assembly by first connecting the communication wire to the user interface board and the grounding wire to the grounding tab.
19
Now realign the panel assembly on the frame, then thread and tighten the four screws to secure.
20
Realign the mounting brackets and secure them with the screws.
21
Push the wall oven back into the cabinet.
22
Confirm that the side trim pieces are in place, then thread the screws to secure the frame to the cabinet.
23
With the repair completed, turn the power supply back on and the double wall oven should be ready for use.
Applicable Product Model
Related Articles & Videos
03:31
Part Replacement
Kitchenaid Double Wall Oven Control Panel Assembly (Black) Replacement #W11087449
02:50
Part Replacement
Kitchenaid Double Wall Oven Inner Door Glass Replacement #W10827059
08:02
Part Replacement
Kitchenaid Double Wall Oven Cooling Fan Blower Replacement #W10861504
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com