Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Wall Oven Convection Element Replacement #W10546519
Kitchenaid Double Wall Oven Convection Element Replacement #W10546519
Skill Level
Total Parts Cost
$77.09Estimated Savings
$112.5003:09
- Description
This video provides step-by-step repair instructions for replacing the convection element on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the element is if the convection setting will not work properly.
All of the information for this element replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this element replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step By Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Convection Element Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or nut driver
4
Shock
5
Be sure to shut off the power to the oven junction box.
6
For easier access to the rear of the oven, we recommend removing the appropriate oven door.
7
Fully open the door and rotate both door hinge locks back.
8
Heavy
9
Partially close the door, then lift and pull the door toward you to remove.
10
With the handle side down, set the door on a blanket.
11
Remove any racks that are in the way.
12
Using a Phillips-head screwdriver, unthread the two screws securing the convection fan cover.
13
Sharp
14
Pull the cover up to detach.
15
Use a quarter-inch socket or nut driver to unthread the screw securing the element mounting plate.
16
Detach the element and pull it forward and disconnect the wires from the terminals - make sure the wires don?t slip through the holes behind the rear panel.
17
Install the new convection element by first connecting the wires to the terminals.
18
Now insert the bracket tab into the slot in the rear panel
19
Align the element and replace the screw to secure the mounting plate.
20
Replace the cover by inserting the tabs into the rear panel slots, then lift the cover up and rethread the screws to secure.
21
Replace any oven racks.
22
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
23
Lower the door to its fully open position, then rotate the hinge locks forward.
24
With the repair completed, turn the power supply back on and the double wall oven should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the convection element on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the element is if the convection setting will not work properly.
All of the information for this element replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this element replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Convection Element Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or nut driver
4
Shock
5
Be sure to shut off the power to the oven junction box.
6
For easier access to the rear of the oven, we recommend removing the appropriate oven door.
7
Fully open the door and rotate both door hinge locks back.
8
Heavy
9
Partially close the door, then lift and pull the door toward you to remove.
10
With the handle side down, set the door on a blanket.
11
Remove any racks that are in the way.
12
Using a Phillips-head screwdriver, unthread the two screws securing the convection fan cover.
13
Sharp
14
Pull the cover up to detach.
15
Use a quarter-inch socket or nut driver to unthread the screw securing the element mounting plate.
16
Detach the element and pull it forward and disconnect the wires from the terminals - make sure the wires don?t slip through the holes behind the rear panel.
17
Install the new convection element by first connecting the wires to the terminals.
18
Now insert the bracket tab into the slot in the rear panel
19
Align the element and replace the screw to secure the mounting plate.
20
Replace the cover by inserting the tabs into the rear panel slots, then lift the cover up and rethread the screws to secure.
21
Replace any oven racks.
22
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
23
Lower the door to its fully open position, then rotate the hinge locks forward.
24
With the repair completed, turn the power supply back on and the double wall oven should be ready for use.
Applicable Product Model
Parts Needed
Convection Element
$77.09
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
03:31
Part Replacement
Kitchenaid Double Wall Oven Control Panel Assembly (Black) Replacement #W11087449
02:50
Part Replacement
Kitchenaid Double Wall Oven Inner Door Glass Replacement #W10827059
08:02
Part Replacement
Kitchenaid Double Wall Oven Cooling Fan Blower Replacement #W10861504
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com