Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Wall Oven Control Panel Assembly (Stainless) Replacement #W11086141
Kitchenaid Double Wall Oven Control Panel Assembly (Stainless) Replacement #W11086141
Skill Level
Total Parts Cost
$422.78Estimated Savings
$112.5003:24
- Description
This video provides step-by-step repair instructions for replacing the control panel assembly (stainless) on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the panel is if it is damaged.
All of the information for this pamelreplacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this pamelreplacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step By Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control panel assembly on your double wall oven…
6
…be sure to shut off the power to the oven junction box.
7
Open the oven doors so you can use a phillips-head screwdriver to unthread the four screws securing the wall oven frame to the cabinet.
8
Have an assistant help you to slide the appliance forward approximately four inches.
9
Now use the phillips-head screwdriver or a quarter-inch nut driver to unthread the screws to release the two control panel mounting brackets.
10
Next, remove the four screws securing the panel assembly itself.
11
Lift the control panel assembly up to detach.
12
Disconnect the communication wire as well as the grounding wire to fully remove the old assembly.
13
Install the new control panel assembly…
14
…by first connecting the communication wire to the user interface board…
15
…and the grounding wire to the grounding tab.
16
Now align the panel assembly on the frame…
17
…then thread and tighten the four screws to secure.
18
Realign the mounting brackets…
19
…and secure them with the screws.
20
Push the wall oven back into the cabinet.
21
Confirm that the side trim pieces are in place…
22
…then thread the screws to secure the frame to the cabinet.
23
With the repair completed…
24
…turn the power supply back on…
25
…and the double wall oven should be ready for use.
26
At repairclinic – we make fixing things easy.
27
Thank you for supporting the production of these videos by purchasing your parts from our website.
Description
This video provides step-by-step repair instructions for replacing the control panel assembly (stainless) on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the panel is if it is damaged.
All of the information for this pamelreplacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this pamelreplacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions
1
Anncr: repairclinic makes fixing things easy…
2
…with millions of replacement parts available on our website…
3
…and the help you need to do the repair yourself.
4
Since we encourage you to perform this repair safely, a warning icon will appear when you should use caution.
5
Before you replace the control panel assembly on your double wall oven…
6
…be sure to shut off the power to the oven junction box.
7
Open the oven doors so you can use a phillips-head screwdriver to unthread the four screws securing the wall oven frame to the cabinet.
8
Have an assistant help you to slide the appliance forward approximately four inches.
9
Now use the phillips-head screwdriver or a quarter-inch nut driver to unthread the screws to release the two control panel mounting brackets.
10
Next, remove the four screws securing the panel assembly itself.
11
Lift the control panel assembly up to detach.
12
Disconnect the communication wire as well as the grounding wire to fully remove the old assembly.
13
Install the new control panel assembly…
14
…by first connecting the communication wire to the user interface board…
15
…and the grounding wire to the grounding tab.
16
Now align the panel assembly on the frame…
17
…then thread and tighten the four screws to secure.
18
Realign the mounting brackets…
19
…and secure them with the screws.
20
Push the wall oven back into the cabinet.
21
Confirm that the side trim pieces are in place…
22
…then thread the screws to secure the frame to the cabinet.
23
With the repair completed…
24
…turn the power supply back on…
25
…and the double wall oven should be ready for use.
26
At repairclinic – we make fixing things easy.
27
Thank you for supporting the production of these videos by purchasing your parts from our website.
Applicable Product Model
Parts Needed
Touchpad and Control Panel
$422.78
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
03:31
Part Replacement
Kitchenaid Double Wall Oven Control Panel Assembly (Black) Replacement #W11087449
02:50
Part Replacement
Kitchenaid Double Wall Oven Inner Door Glass Replacement #W10827059
08:02
Part Replacement
Kitchenaid Double Wall Oven Cooling Fan Blower Replacement #W10861504
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com