Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Wall Oven Inner Door Frame Replacement #WPW10709147
Kitchenaid Double Wall Oven Inner Door Frame Replacement #WPW10709147
Skill Level
Total Parts Cost
$188.55Estimated Savings
$112.5003:22
- Description
This video provides step-by-step repair instructions for replacing the inner door panel on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the panel is if it is damaged or dirty.
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step By Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Inner Door Frame Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or nut driver
4
Fully open the appropriate door and rotate both door hinge locks back.
5
Heavy
6
Partially close the door, then lift and pull the door toward you to remove.
7
With the handle side down, set the door on a sturdy surface.
8
Using a Phillips-head screwdriver, unthread the four screws securing the inner door frame to the outer door assembly.
9
Sharp
10
With the screws removed, lift off the old frame.
11
Prepare the new inner door frame for installation by transferring the inner door glass and baffle from the old frame to the new one.
12
Use a quarter-inch socket or nut driver to unthread the screws securing the glass retaining bracket.
13
Fragile
14
Carefully remove the glass and align it in the new door frame.
15
Position the retaining bracket and secure it with the screws.
16
Next, unthread the screws to release the baffle from the old frame and position the baffle on the new frame.
17
Secure it with the screws.
18
Now position the new frame on the outer door assembly.
19
Thread and tighten the four screws to secure ? the short screws secure the bottom of the frame.
20
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
21
Lower the door to its fully open position, then rotate the hinge locks forward.
Description
This video provides step-by-step repair instructions for replacing the inner door panel on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the panel is if it is damaged or dirty.
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this panel replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Inner Door Frame Replacement
3
Tools needed: Phillips-head screwdriver, quarter-inch socket or nut driver
4
Fully open the appropriate door and rotate both door hinge locks back.
5
Heavy
6
Partially close the door, then lift and pull the door toward you to remove.
7
With the handle side down, set the door on a sturdy surface.
8
Using a Phillips-head screwdriver, unthread the four screws securing the inner door frame to the outer door assembly.
9
Sharp
10
With the screws removed, lift off the old frame.
11
Prepare the new inner door frame for installation by transferring the inner door glass and baffle from the old frame to the new one.
12
Use a quarter-inch socket or nut driver to unthread the screws securing the glass retaining bracket.
13
Fragile
14
Carefully remove the glass and align it in the new door frame.
15
Position the retaining bracket and secure it with the screws.
16
Next, unthread the screws to release the baffle from the old frame and position the baffle on the new frame.
17
Secure it with the screws.
18
Now position the new frame on the outer door assembly.
19
Thread and tighten the four screws to secure ? the short screws secure the bottom of the frame.
20
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
21
Lower the door to its fully open position, then rotate the hinge locks forward.
Applicable Product Model
Related Articles & Videos
03:31
Part Replacement
Kitchenaid Double Wall Oven Control Panel Assembly (Black) Replacement #W11087449
02:50
Part Replacement
Kitchenaid Double Wall Oven Inner Door Glass Replacement #W10827059
08:02
Part Replacement
Kitchenaid Double Wall Oven Cooling Fan Blower Replacement #W10861504
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com