Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Wall Oven Door Hinge Replacement #W10825778 
Kitchenaid Double Wall Oven Door Hinge Replacement #W10825778
Skill Level
Total Parts Cost
$56.33Estimated Savings
$112.5003:32
- Description
This video provides step-by-step repair instructions for replacing the door hinge on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the hinge is if the door will not open or close properly.
All of the information for this door hinge replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this door hinge replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step By Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Door Hinge Replacement
3
Tools needed: Phillips-head screwdriver
4
Fully open the appropriate door and rotate both door hinge locks back.
5
Heavy
6
Partially close the door, then lift and pull the door toward you to remove.
7
With the handle side down, set the door on a sturdy surface.
8
Using a Phillips-head screwdriver, unthread the four screws securing the inner door frame to the outer door assembly.
9
Sharp
10
With the screws removed, lift off the frame.
11
Lift out the window pack from the outer door assembly.
12
Now unthread the two screws securing the hinge you?re replacing as well as the middle screw securing the window pack bracket.
13
With the screws removed, slide the old hinge assembly out.
14
Install the new door hinge by inserting it into the outer door frame.
15
Thread and tighten the two screws to secure.
16
Realign the window pack bracket and secure it with the screw.
17
Reposition the window pack in the outer door assembly so the engraved ?up? notations are visible.
18
Reposition the inner door frame on the outer door assembly.
19
Thread and tighten the four screws to secure ? the short screws secure the bottom of the frame.
20
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
21
Lower the door to its fully open position, then rotate the hinge locks forward.
Description
This video provides step-by-step repair instructions for replacing the door hinge on a Kitchenaid Double Wall Oven (model #KODE500ESS02). The most common reason for replacing the hinge is if the door will not open or close properly.
All of the information for this door hinge replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
All of the information for this door hinge replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: Phillips-head screwdriver, 1/4" socket or nut driver
Step-By-Step Instructions
1
KitchenAid Built-In Double Oven - KODE500ESS02
2
Double Wall Oven Door Hinge Replacement
3
Tools needed: Phillips-head screwdriver
4
Fully open the appropriate door and rotate both door hinge locks back.
5
Heavy
6
Partially close the door, then lift and pull the door toward you to remove.
7
With the handle side down, set the door on a sturdy surface.
8
Using a Phillips-head screwdriver, unthread the four screws securing the inner door frame to the outer door assembly.
9
Sharp
10
With the screws removed, lift off the frame.
11
Lift out the window pack from the outer door assembly.
12
Now unthread the two screws securing the hinge you?re replacing as well as the middle screw securing the window pack bracket.
13
With the screws removed, slide the old hinge assembly out.
14
Install the new door hinge by inserting it into the outer door frame.
15
Thread and tighten the two screws to secure.
16
Realign the window pack bracket and secure it with the screw.
17
Reposition the window pack in the outer door assembly so the engraved ?up? notations are visible.
18
Reposition the inner door frame on the outer door assembly.
19
Thread and tighten the four screws to secure ? the short screws secure the bottom of the frame.
20
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
21
Lower the door to its fully open position, then rotate the hinge locks forward.
Applicable Product Model
Related Articles & Videos
03:31
Part Replacement
Kitchenaid Double Wall Oven Control Panel Assembly (Black) Replacement #W11087449
02:50
Part Replacement
Kitchenaid Double Wall Oven Inner Door Glass Replacement #W10827059
08:02
Part Replacement
Kitchenaid Double Wall Oven Cooling Fan Blower Replacement #W10861504
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com