Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairBriggs & Stratton Lawn Mower Won't Start? Ignition Coil #590454
Briggs & Stratton Lawn Mower Won't Start? Ignition Coil #590454
Skill Level
Total Parts Cost
$60.99Estimated Savings
$112.5003:14
- Description
This video provides step-by-step repair instructions for replacing the ignition coil on a Briggs and Stratton small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, and generators). The most common reason for replacing the ignition coil is when the engine won’t start or is hard to start.
All of the information for this ignition coil replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere, Lawn Boy, Craftsman
Tools needed: screwdriver, nut driver, socket wrench
All of the information for this ignition coil replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere, Lawn Boy, Craftsman
Tools needed: screwdriver, nut driver, socket wrench
Step By Step Instructions
1
Before you begin the repair, make sure the engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to remove the starter rope from the rope guide.
3
Next, remove the screws to release the engine cover.
4
Feed the starter handle through the cover and set the cover aside.
5
Now, remove the screws securing the gas tank and move the gas tank aside.
6
Be aware that some gasoline may spill out.
7
Next, remove the mounting screw securing the dipstick tube and remove the tube from the engine.
8
Keep in mind that some engine oil may spill.
9
Remove the bolts securing the blower housing and pull the housing off.
10
Next, remove the retaining screws to release the old ignition coil.
11
Disconnect the grounding wire and remove the old coil.
12
Prepare the new ignition coil for installation by attaching the provided spark plug boot or transferring the boot from the old coil to the new one.
13
Attach the grounding wire, seat the coil, and insert the mounting screws.
14
Use the provided instruction tag to position the coil the correct distance from the flywheel, then secure the screws.
15
Position the blower housing on the engine and secure the bolts.
16
Carefully insert the dipstick tube into the engine sump and secure the mounting screw.
17
Reposition the gas tank and reinstall the screws.
18
Feed the starter handle through the engine cover, then align the cover and secure it with the screws.
19
Loop the starter rope onto the guide and reattach the spark plug wire and boot.
Description
This video provides step-by-step repair instructions for replacing the ignition coil on a Briggs and Stratton small engine (which is commonly found in lawn mowers, riding tractors, zero-turn radius mowers, wheeled edgers, pressure washers, and generators). The most common reason for replacing the ignition coil is when the engine won’t start or is hard to start.
All of the information for this ignition coil replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere, Lawn Boy, Craftsman
Tools needed: screwdriver, nut driver, socket wrench
All of the information for this ignition coil replacement video is applicable to the following brands:
Briggs & Stratton, Toro, John Deere, Lawn Boy, Craftsman
Tools needed: screwdriver, nut driver, socket wrench
Step-By-Step Instructions
1
Before you begin the repair, make sure the engine has cooled and remove the wire and boot from the spark plug.
2
Your first step is to remove the starter rope from the rope guide.
3
Next, remove the screws to release the engine cover.
4
Feed the starter handle through the cover and set the cover aside.
5
Now, remove the screws securing the gas tank and move the gas tank aside.
6
Be aware that some gasoline may spill out.
7
Next, remove the mounting screw securing the dipstick tube and remove the tube from the engine.
8
Keep in mind that some engine oil may spill.
9
Remove the bolts securing the blower housing and pull the housing off.
10
Next, remove the retaining screws to release the old ignition coil.
11
Disconnect the grounding wire and remove the old coil.
12
Prepare the new ignition coil for installation by attaching the provided spark plug boot or transferring the boot from the old coil to the new one.
13
Attach the grounding wire, seat the coil, and insert the mounting screws.
14
Use the provided instruction tag to position the coil the correct distance from the flywheel, then secure the screws.
15
Position the blower housing on the engine and secure the bolts.
16
Carefully insert the dipstick tube into the engine sump and secure the mounting screw.
17
Reposition the gas tank and reinstall the screws.
18
Feed the starter handle through the engine cover, then align the cover and secure it with the screws.
19
Loop the starter rope onto the guide and reattach the spark plug wire and boot.
Applicable Product Model
Parts Needed
Ignition Coil
$60.99
Total$0.00
Related Articles & Videos
03:19
Part Replacement
Lawn Mower Won't Stay Running? Briggs & Stratton Carburetor #799866
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com