Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Fuse Holder Replacement #W10245194
Kitchenaid Microwave Fuse Holder Replacement #W10245194
Skill Level
Total Parts Cost
$19.25Estimated Savings
$112.5003:36
- Description
This video provides step-by-step repair instructions for replacing the fuse holder on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the holder is if it is damaged.
All of the information for this fuse holder replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this fuse holder replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS0
2
KitchenAid Built-In Microwave Oven Fuse Holder Replacement
3
"Step 1: Before you begin, be sure to turn off the power supply to your microwave."
4
Step 2: Open the oven door and remove any racks from the oven along with the turntable and support.
5
"Step 3: You will need a regular Phillips-head screw driver, a T-10 Torx Bit, and an assistant to help move heavy microwave. "
6
Step 4: Use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
7
Step 5: Remove the washers as well if still intact.
8
Step 6: Have an assistant help you pull the appliance out of the cabinet and set it on a sturdy surface.
9
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
10
Step 8: Use the Phillips-head screwdriver to unthread the four screws securing the top access panel.
11
Step 9: Lift the panel up then slide foward to remove.
12
Step 10: Pull the fuse out of the holder.
13
Step 11: Disconnect the wires from the fuse holder terminals.
14
Step 12: Now use a T-10 Torx Bit to unthread the screw to release the old holder.
15
Step 13: Install the new fuse holder by aligning it on the blower housing and then thread the screw to secure.
16
Step 14: Connect the wires to the terminals and insert the fuse into the new fuse holder.
17
Step 15: Replace the top access panel by inserting the rear edge first.
18
Step 16: Secure the top access panel with the screws.
19
Step 17: Thread and tighten the six screws to secure the housing.
20
"Step 17: With an assistant, return the microwave oven to the cabinet and push it into position. "
21
Step 20: Replace the support and align the turntable on the coupling.
22
Step 20: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
23
"Step 21: Once the repair is completed, turn the power supply to the microwave back on."
24
Congrats! Your microwave is now ready for use.
Description
This video provides step-by-step repair instructions for replacing the fuse holder on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the holder is if it is damaged.
All of the information for this fuse holder replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this fuse holder replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS0
2
KitchenAid Built-In Microwave Oven Fuse Holder Replacement
3
"Step 1: Before you begin, be sure to turn off the power supply to your microwave."
4
Step 2: Open the oven door and remove any racks from the oven along with the turntable and support.
5
"Step 3: You will need a regular Phillips-head screw driver, a T-10 Torx Bit, and an assistant to help move heavy microwave. "
6
Step 4: Use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
7
Step 5: Remove the washers as well if still intact.
8
Step 6: Have an assistant help you pull the appliance out of the cabinet and set it on a sturdy surface.
9
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
10
Step 8: Use the Phillips-head screwdriver to unthread the four screws securing the top access panel.
11
Step 9: Lift the panel up then slide foward to remove.
12
Step 10: Pull the fuse out of the holder.
13
Step 11: Disconnect the wires from the fuse holder terminals.
14
Step 12: Now use a T-10 Torx Bit to unthread the screw to release the old holder.
15
Step 13: Install the new fuse holder by aligning it on the blower housing and then thread the screw to secure.
16
Step 14: Connect the wires to the terminals and insert the fuse into the new fuse holder.
17
Step 15: Replace the top access panel by inserting the rear edge first.
18
Step 16: Secure the top access panel with the screws.
19
Step 17: Thread and tighten the six screws to secure the housing.
20
"Step 17: With an assistant, return the microwave oven to the cabinet and push it into position. "
21
Step 20: Replace the support and align the turntable on the coupling.
22
Step 20: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
23
"Step 21: Once the repair is completed, turn the power supply to the microwave back on."
24
Congrats! Your microwave is now ready for use.
Applicable Product Model
Parts Needed
Fuse Holder
$19.25
Total$0.00
Related Articles & Videos
09:12
Part Replacement
Whirlpool Microwave Oven/Hood Combo Fuse Holder Replacement #W10245194
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com