Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Turntable Motor Adapter Replacement #W10656578
Kitchenaid Microwave Turntable Motor Adapter Replacement #W10656578
Skill Level
Total Parts Cost
$23.73Estimated Savings
$112.5003:28
- Description
This video provides step-by-step repair instructions for replacing the turntable motor adapter on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the adapter is if the turntable will not rotate properly.
All of the information for this adapter replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this adapter replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Turntable Motor Adapter Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED
4
"Step 1: You will need a regular Phillips-head screwdriver, wire cutters, and an assistant to help move heavy microwave."
5
"Step 2: Before you begin, be sure to turn off the power supply to your microwave."
6
Step 3: Open the oven door and remove any racks fro the oven along with the turntable and support.
7
Step 4: Remove the turntable motor coupling as well by lifting it straight up.
8
Step 5: Use a Phillips-head screwdriver to unthread the two screwss securing the mounting flanges to the cabinet.
9
Step 6: Remove the washers as well if still intact.
10
Step 7: Now have an assistant help you to pull the appliance out of the cabinet and set the oven on its side on a sturdy surface.
11
Step 8: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
12
Step 9: Now cut out the peforated access cover on the bottom of the appliance.
13
Step 10: Rorate the turntable motor assembly clockwise to detach.
14
Step 11: You can now lift off the old adapter.
15
Step 12: Install the new turntable motor adapter by aligning it on the motor.
16
Step 13: Position the motor and adapter on the base and rotate counter-clockwide to lock it into place.
17
Step 14: Align the access vover and secure it with screws
18
Step 15: With an assistant return the microwave oven to the cabinet and push it into position.
19
Step 16: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
20
Step 17: Align the coupling on the motor shaft and push it into place.
21
Step 18: Replace the support and align the turntable on the coupling.
22
Step 19: Turn the power supply to the microwave on.
23
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the turntable motor adapter on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the adapter is if the turntable will not rotate properly.
All of the information for this adapter replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this adapter replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Turntable Motor Adapter Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED
4
"Step 1: You will need a regular Phillips-head screwdriver, wire cutters, and an assistant to help move heavy microwave."
5
"Step 2: Before you begin, be sure to turn off the power supply to your microwave."
6
Step 3: Open the oven door and remove any racks fro the oven along with the turntable and support.
7
Step 4: Remove the turntable motor coupling as well by lifting it straight up.
8
Step 5: Use a Phillips-head screwdriver to unthread the two screwss securing the mounting flanges to the cabinet.
9
Step 6: Remove the washers as well if still intact.
10
Step 7: Now have an assistant help you to pull the appliance out of the cabinet and set the oven on its side on a sturdy surface.
11
Step 8: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
12
Step 9: Now cut out the peforated access cover on the bottom of the appliance.
13
Step 10: Rorate the turntable motor assembly clockwise to detach.
14
Step 11: You can now lift off the old adapter.
15
Step 12: Install the new turntable motor adapter by aligning it on the motor.
16
Step 13: Position the motor and adapter on the base and rotate counter-clockwide to lock it into place.
17
Step 14: Align the access vover and secure it with screws
18
Step 15: With an assistant return the microwave oven to the cabinet and push it into position.
19
Step 16: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
20
Step 17: Align the coupling on the motor shaft and push it into place.
21
Step 18: Replace the support and align the turntable on the coupling.
22
Step 19: Turn the power supply to the microwave on.
23
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com