Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Control Panel Assembly Replacement #W10588761
Kitchenaid Microwave Control Panel Assembly Replacement #W10588761
Skill Level
Total Parts Cost
$521.06Estimated Savings
$112.5002:40
- Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the assembly is if it is damaged or non-functional.
All of the information for this assembly replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this assembly replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Control Panel Assembly
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a Phillips-head screwdriver.
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Pull the appliance forward approximately four inches.
10
Step 7: Unthread the four screws securing the control panel assembly.
11
Step 8: Lift the control panel assembly up to detach.
12
Step 9: Disconnect the communication wire as well as the grounding wire to fully remove the old assembly.
13
Step 10: Install the new control panel assembly by first connecting the communication wire to the user interface board and the grounding wire to the grounding tab.
14
"Step 11: Align the panel assembly on the flanges, then thread and tighten the four screws to secure. "
15
Step 12: Push the appliance back into the cabinet.
16
Step 13: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
17
Step 14: Replace the support and align the turntable on the coupling.
18
Step 15: Turn on the power supply back on to the microwave.
19
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the control panel assembly on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the assembly is if it is damaged or non-functional.
All of the information for this assembly replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this assembly replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Control Panel Assembly
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a Phillips-head screwdriver.
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Pull the appliance forward approximately four inches.
10
Step 7: Unthread the four screws securing the control panel assembly.
11
Step 8: Lift the control panel assembly up to detach.
12
Step 9: Disconnect the communication wire as well as the grounding wire to fully remove the old assembly.
13
Step 10: Install the new control panel assembly by first connecting the communication wire to the user interface board and the grounding wire to the grounding tab.
14
"Step 11: Align the panel assembly on the flanges, then thread and tighten the four screws to secure. "
15
Step 12: Push the appliance back into the cabinet.
16
Step 13: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
17
Step 14: Replace the support and align the turntable on the coupling.
18
Step 15: Turn on the power supply back on to the microwave.
19
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Parts Needed
Control Panel
$521.06
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com