Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Turntable Motor Replacement #W10911403 
Kitchenaid Microwave Turntable Motor Replacement #W10911403
Skill Level
Total Parts Cost
$79.59Estimated Savings
$112.5003:46
- Description
This video provides step-by-step repair instructions for replacing the turntable motor on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the motor is if the turntable will not rotate.
All of the information for this microwave turntable motor replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave turntable motor replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Turntable Motor
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
"Step 1: You will need a Phillips-head screwdriver, T-10 Torx bit, and an assistant to help move heavy microwave."
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver or quarter-inch nut driver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Now have an assistant to help you pull the appliance out of the cabinet and set it on a sturdy surface.
10
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
11
"Step 8: Using a T-10 Torx bit, unthread the two screws securing the rear cover. "
12
Step 9: Cut out the perforated access cover on the bottom of the appliance.
13
Step 10: Rotate the old turntable motor assembly clockwise to detach it from the base.
14
Step 11: Depress the tabs to disconnect the wires.
15
Step 12: Prepare the new turntable motor for installation by transferring the adapter from the old motor to the new one.
16
Step 13: Connect the wires to the terminals.
17
Step 14: Position the motor and adapter on the base and rotate counter-clockwise to lock it into place.
18
Step 15: Align the access cover and secure it with screws.
19
"Step 16: With an assistant, return the microwave oven to the cabinet and push it into position. "
20
Step 17: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
21
Step 18: Replace the support and align the turntable on the coupling.
22
Step 19: Turn on the power supply back on to the microwave.
23
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the turntable motor on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the motor is if the turntable will not rotate.
All of the information for this microwave turntable motor replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave turntable motor replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Turntable Motor
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
"Step 1: You will need a Phillips-head screwdriver, T-10 Torx bit, and an assistant to help move heavy microwave."
5
"Step 2: Before you begin, be sure to turn off the power supply to the oven junction box. "
6
Step 3: Open the oven door and remove any racks from the oven along with the turntable and support.
7
Step 4: Now use a Phillips-head screwdriver or quarter-inch nut driver to unthread the two screws securing the mounting flanges to the cabinet.
8
Step 5: Remove the washers as well if still intact.
9
Step 6: Now have an assistant to help you pull the appliance out of the cabinet and set it on a sturdy surface.
10
Step 7: Be aware that if the conduit cable is not long enough to move the microwave oven you will need to disconnect the power and grounding wires and remove the conduit cable from the junction box.
11
"Step 8: Using a T-10 Torx bit, unthread the two screws securing the rear cover. "
12
Step 9: Cut out the perforated access cover on the bottom of the appliance.
13
Step 10: Rotate the old turntable motor assembly clockwise to detach it from the base.
14
Step 11: Depress the tabs to disconnect the wires.
15
Step 12: Prepare the new turntable motor for installation by transferring the adapter from the old motor to the new one.
16
Step 13: Connect the wires to the terminals.
17
Step 14: Position the motor and adapter on the base and rotate counter-clockwise to lock it into place.
18
Step 15: Align the access cover and secure it with screws.
19
"Step 16: With an assistant, return the microwave oven to the cabinet and push it into position. "
20
Step 17: Insert the washers into the holes in the flanges then thread the two screws to secure the flanges to the cabinet.
21
Step 18: Replace the support and align the turntable on the coupling.
22
Step 19: Turn on the power supply back on to the microwave.
23
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com