Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Microwave Wave Guide Cover Replacement #W10915651 
Kitchenaid Microwave Wave Guide Cover Replacement #W10915651
Skill Level
Total Parts Cost
$54.24Estimated Savings
$112.5001:45
- Description
This video provides step-by-step repair instructions for replacing the wave guide cover on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the cover is if your food is not cooking evenly in the microwave.
All of the information for this microwave cover replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave cover replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step By Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Wave Guide Cover Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a T-15 Torx bit and a razor blade.
5
Step 2: Remove any racks from the oven along with the turntable and support.
6
"Step 3: Using a T-15 Torx bit, unthread the screws securing the cover you're replacing. "
7
Step 4: Use a razor blade to help detach the old cover.
8
"Step 5: Before you install the new wave guide cover, clean off any residue from the outlet. "
9
Step 6: Apply a thin layer of silicone around the outlet.
10
"Step 7: Align the new cover, then thread the screws to secure. "
11
"Step 8: With the cover installed, replace the support and align the turntable on the coupling. "
12
Congrats! Your microwave oven is ready for use.
Description
This video provides step-by-step repair instructions for replacing the wave guide cover on a Kitchenaid microwave (Model #KMBP100ESS01). The most common reason for replacing the cover is if your food is not cooking evenly in the microwave.
All of the information for this microwave cover replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
All of the information for this microwave cover replacement video is applicable to the following brands:
Kitchenaid, Whirlpool
Tools used: multi-screwdriver
Step-By-Step Instructions
1
Microwave Oven -Model KMBP100ESS01
2
KitchenAid Built-In Microwave Oven Wave Guide Cover Replacement
3
ATTENTION: TOOLS & ASSISTANCE NEEDED:
4
Step 1: You will need a T-15 Torx bit and a razor blade.
5
Step 2: Remove any racks from the oven along with the turntable and support.
6
"Step 3: Using a T-15 Torx bit, unthread the screws securing the cover you're replacing. "
7
Step 4: Use a razor blade to help detach the old cover.
8
"Step 5: Before you install the new wave guide cover, clean off any residue from the outlet. "
9
Step 6: Apply a thin layer of silicone around the outlet.
10
"Step 7: Align the new cover, then thread the screws to secure. "
11
"Step 8: With the cover installed, replace the support and align the turntable on the coupling. "
12
Congrats! Your microwave oven is ready for use.
Applicable Product Model
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com