Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Broil Supply Tube Replacement #W10306050 
KitchenAid Convection Gas Range Broil Supply Tube Replacement #W10306050
Skill Level
Total Parts Cost
$124.45Estimated Savings
$112.5003:22
- Description
This video provides step-by-step repair instructions for replacing the broil supply tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the broiler is not lighting.
This broil supply tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This broil supply tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Broil Supply Tube
3
You will need a Phillips-head screwdriver, a 9/16th inch wrench and a 5/8th inch wrench to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Using a Phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Unthread the three screws to release the left side stop bracket.
13
Repeat to detatch the right side bracket.
14
Lift the upper rear access panel up to remove.
15
Use a 9/16th inch wrench and a 5/8th inch wrench to unthread the nut from the broil tube orifice fitting.
16
Using the 9/16th inch wrench, unthread the nut securing the tube to the regulator valve and you can remove the old tube.
17
Install the new broil supply tube by inserting the shorter end into the regulator valve then thread the nut to secure. Be careful not to damage the tube by overtightening the nut.
18
Insert the opposite end into the broil tube fitting and secure it with the nut - again, overtightening.
19
Reinstall the upper rear access panel by hooking it on the tabs.
20
Realign the two stop brackets and thread the screws to hold them in place.
21
Reinstall the lower access panel by inserting the tabs in the slots first.
22
Lower the panel and secure it with the screws.
23
Turn the gas supply back on, plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the broil supply tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the broiler is not lighting.
This broil supply tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This broil supply tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range Broil Supply Tube
3
You will need a Phillips-head screwdriver, a 9/16th inch wrench and a 5/8th inch wrench to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Using a Phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Unthread the three screws to release the left side stop bracket.
13
Repeat to detatch the right side bracket.
14
Lift the upper rear access panel up to remove.
15
Use a 9/16th inch wrench and a 5/8th inch wrench to unthread the nut from the broil tube orifice fitting.
16
Using the 9/16th inch wrench, unthread the nut securing the tube to the regulator valve and you can remove the old tube.
17
Install the new broil supply tube by inserting the shorter end into the regulator valve then thread the nut to secure. Be careful not to damage the tube by overtightening the nut.
18
Insert the opposite end into the broil tube fitting and secure it with the nut - again, overtightening.
19
Reinstall the upper rear access panel by hooking it on the tabs.
20
Realign the two stop brackets and thread the screws to hold them in place.
21
Reinstall the lower access panel by inserting the tabs in the slots first.
22
Lower the panel and secure it with the screws.
23
Turn the gas supply back on, plug the power cord back in or restore the power supply.
Applicable Product Model
Parts Needed
Gas Tube or Connector
$124.45
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com