Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Manifold Gas Supply Tube Replacement #W10432252 
KitchenAid Convection Gas Range Manifold Gas Supply Tube Replacement #W10432252
Skill Level
Total Parts Cost
$56.39Estimated Savings
$112.5005:33
- Description
This video provides step-by-step repair instructions for replacing the manifold gas supply tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the oven will not light.
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range - Manifold Gas Supply Tube
3
You will need a Phillips-head screwdriver and a wrench to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel's lower cover.
10
Sharp
11
Remove the cover.
12
Pull off the five control knobs.
13
Unthread the two screws securing the control panel to the frame.
14
Detach the control panel and support it to avoid strainging the wires.
15
Using the Phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
16
Sharp
17
Lift the panel up and out to remove.
18
Unthread the three screws to release the left side stop bracket.
19
Repeat to detach the right side bracket.
20
Lift the upper rear access panel up to remove.
21
Use an adjustable wrench to unthread the nut securing the gas supply tube to the mainfold.
22
Use the wrench to unthread the nut securing the utbe to the regulator valve and you can pull the old tube out.
23
Install the new manifold gas supply tube by feeding the appropriate end under the orifice holder support panel.
24
Insert the opposite end into the regulator valve and thread the nut - be carefule not to damage the tube by overtightening the nut.
25
Connect the new supply tube to the manifold and secure with the nut - again, avoid overtightening.
26
Reinstall the upper rear access panel by hooking it on the tabs.
27
Realign the two stop brackets and thread the screws to hold them in place.
28
Reinstall the lower access panel bu inserting the tabs in the slots first.
29
Lower the panel and secure it with the screws.
30
Realign the control panel on the front breackets.
31
Secure it with the screws.
32
Replace the lower cover, the thread the screws to secure.
33
Realign the control knobs on the valve stems and push them into place - note that the power burner control knob should be placed on the second stem from the left.
34
Turn the gas supply back on, plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the manifold gas supply tube on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the tube is if the oven will not light.
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This tube replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - KSGB900ESS1
2
KitchenAid Convection Gas Range - Manifold Gas Supply Tube
3
You will need a Phillips-head screwdriver and a wrench to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Open the oven door and use a Phillips-head screwdriver to unthread the screws securing the control panel's lower cover.
10
Sharp
11
Remove the cover.
12
Pull off the five control knobs.
13
Unthread the two screws securing the control panel to the frame.
14
Detach the control panel and support it to avoid strainging the wires.
15
Using the Phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
16
Sharp
17
Lift the panel up and out to remove.
18
Unthread the three screws to release the left side stop bracket.
19
Repeat to detach the right side bracket.
20
Lift the upper rear access panel up to remove.
21
Use an adjustable wrench to unthread the nut securing the gas supply tube to the mainfold.
22
Use the wrench to unthread the nut securing the utbe to the regulator valve and you can pull the old tube out.
23
Install the new manifold gas supply tube by feeding the appropriate end under the orifice holder support panel.
24
Insert the opposite end into the regulator valve and thread the nut - be carefule not to damage the tube by overtightening the nut.
25
Connect the new supply tube to the manifold and secure with the nut - again, avoid overtightening.
26
Reinstall the upper rear access panel by hooking it on the tabs.
27
Realign the two stop brackets and thread the screws to hold them in place.
28
Reinstall the lower access panel bu inserting the tabs in the slots first.
29
Lower the panel and secure it with the screws.
30
Realign the control panel on the front breackets.
31
Secure it with the screws.
32
Replace the lower cover, the thread the screws to secure.
33
Realign the control knobs on the valve stems and push them into place - note that the power burner control knob should be placed on the second stem from the left.
34
Turn the gas supply back on, plug the power cord back in or restore the power supply.
Applicable Product Model
Parts Needed
Gas Tube or Connector
$56.39
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com