Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Right Control Panel Endcap Replacement #W10555940 
KitchenAid Convection Gas Range Right Control Panel Endcap Replacement #W10555940
Skill Level
Total Parts Cost
$48.70Estimated Savings
$112.5003:49
- Description
This video provides step-by-step repair instructions for replacing the right control panel endcap on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the endcap is if it is damaged or missing.
This endcap replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This endcap replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Right Control Panel End Cap Replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the oven door and use a phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Next, unthread the two screws securing the control panel to the frame.
13
Detach the control panel then disconnect the display board wire connecter and the touch-pad ribbon connecter to fully release the panel.
14
You can now unthread the mounting screws to release the old end cap, if still intact.
15
Install the new end cap by aligning it on the panel then thread and tighten the mounting screws.
16
Returning to the range, connect the wire connecter to the new display board and the ribbon connecter to the touch-pad.
17
Realign the control panel on the front brackets.
18
Secure it with the screws.
19
Replace the lower cover then thread the screws to secure.
20
Realign the control knobs on the valve stems and push them into place ? note that the power burner control knob should be placed on the second stem from the left.
21
Turn the gas supply back on.
22
Plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the right control panel endcap on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the endcap is if it is damaged or missing.
This endcap replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This endcap replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Right Control Panel End Cap Replacement
3
You will need a phillips-head screwdriver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the oven door and use a phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Next, unthread the two screws securing the control panel to the frame.
13
Detach the control panel then disconnect the display board wire connecter and the touch-pad ribbon connecter to fully release the panel.
14
You can now unthread the mounting screws to release the old end cap, if still intact.
15
Install the new end cap by aligning it on the panel then thread and tighten the mounting screws.
16
Returning to the range, connect the wire connecter to the new display board and the ribbon connecter to the touch-pad.
17
Realign the control panel on the front brackets.
18
Secure it with the screws.
19
Replace the lower cover then thread the screws to secure.
20
Realign the control knobs on the valve stems and push them into place ? note that the power burner control knob should be placed on the second stem from the left.
21
Turn the gas supply back on.
22
Plug the power cord back in or restore the power supply.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com