Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Broil Tube Orifice Replacement #W10583216 
KitchenAid Convection Gas Range Broil Tube Orifice Replacement #W10583216
Skill Level
Total Parts Cost
$68.68Estimated Savings
$112.5003:54
- Description
This video provides step-by-step repair instructions for replacing the broil tube orifice on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the orifice is if the broiler in the oven will not light.
This orifice replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This orifice replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Broil Tube Orifice Replacement
3
You will need a 9/16th inch wrench, a 5/8th inch wrench, and a phillips-head screwdriver to complete this repair.
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Using a phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Unthread the three screws to release the left side stop bracket.
13
Repeat to detach the right side bracket.
14
Now lift the upper rear access panel up to remove.
15
Use a 9/16th inch wrench and a 5/8th inch wrench to unthread the nut from the broil tube orifice fitting.
16
Open the oven door and remove the racks.
17
Now unthread the screws securing the broil tube and orifice assembly mounting plate.
18
With the screws unthreaded, you can pull the old assembly free.
19
Install the new broil tube and orifice assembly by inserting the fitting through the hole in the rear of the oven then position the orifice into the broil burner tube.
20
Secure the mounting plate with the screws.
21
Insert the broil supply tube into the fitting and secure it with the nut ? be careful not to damage the tube by overtightening the nut.
22
Reinstall the upper rear access panel by hooking it on the tabs.
23
Realign the two stop brackets and thread the screws to hold them in place.
24
Reinstall the lower access panel by inserting the tabs in the slots first.
25
Lower the panel and secure it with the screws.
26
Slide the oven racks into place.
27
Turn the gas supply back on.
28
Plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the broil tube orifice on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the orifice is if the broiler in the oven will not light.
This orifice replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This orifice replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Broil Tube Orifice Replacement
3
You will need a 9/16th inch wrench, a 5/8th inch wrench, and a phillips-head screwdriver to complete this repair.
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Using a phillips-head screwdriver, unthread the two screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Unthread the three screws to release the left side stop bracket.
13
Repeat to detach the right side bracket.
14
Now lift the upper rear access panel up to remove.
15
Use a 9/16th inch wrench and a 5/8th inch wrench to unthread the nut from the broil tube orifice fitting.
16
Open the oven door and remove the racks.
17
Now unthread the screws securing the broil tube and orifice assembly mounting plate.
18
With the screws unthreaded, you can pull the old assembly free.
19
Install the new broil tube and orifice assembly by inserting the fitting through the hole in the rear of the oven then position the orifice into the broil burner tube.
20
Secure the mounting plate with the screws.
21
Insert the broil supply tube into the fitting and secure it with the nut ? be careful not to damage the tube by overtightening the nut.
22
Reinstall the upper rear access panel by hooking it on the tabs.
23
Realign the two stop brackets and thread the screws to hold them in place.
24
Reinstall the lower access panel by inserting the tabs in the slots first.
25
Lower the panel and secure it with the screws.
26
Slide the oven racks into place.
27
Turn the gas supply back on.
28
Plug the power cord back in or restore the power supply.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com