Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Drawer Front Replacement #W10861216 
KitchenAid Convection Gas Range Drawer Front Replacement #W10861216
Skill Level
Total Parts Cost
$99.89Estimated Savings
$112.5003:33
- Description
This video provides step-by-step repair instructions for replacing the drawer front on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the front is if it is damaged.
This drawer front replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This drawer front replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Drawer Front Replacement
3
You will need a phillips-head screwdriver or Number 2 square drive bit, pliers, to complete this repair.
4
Shock
5
Be Sure To Unplug The Power Cord Or Shut Off The Power Supply.
6
Pull Out The Drawer And Remove The Rack.
7
Sharp
8
Next, Use Pliers To Bend The Slide Rails Outward To Fully Detach The Drawer Assembly ? This May Require Some Effort.
9
Set The Drawer Upside Down On A Sturdy Surface.
10
Use A Phillips-head Screwdriver Or A Number Two Square Drive Bit To Unthread The Screws At The Bottom Of The Front Panel.
11
Turn The Drawer Assembly Over, And Remove The Top Screws.
12
Detach The Drawer From The Front Panel.
13
Sharp
14
Set The Insulation And The Inner Panel Aside.
15
Unthread The Mounting Screws To Release The Drawer Handle.
16
You?re Now Ready To Prepare The New Drawer Front For Installation.
17
Align The Handle On The New Front Panel, Reposition The Support Washers, Then Thread And Tighten The Mounting Screws.
18
Position The Inner Panel And The Insulation.
19
Align The Drawer On The Front Panel, And Rethread The Top Screws.
20
Turn The Drawer Assembly Over, And Rethread The Bottom Screws.
21
With Both Slide Rails Pulled Out, Align The Slots In The Drawer Assembly With The Tabs On The Slide Rails And Snap The Assembly Into Position.
22
Plug The Power Cord Back In Or Restore The Power Supply.
Description
This video provides step-by-step repair instructions for replacing the drawer front on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the front is if it is damaged.
This drawer front replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This drawer front replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Drawer Front Replacement
3
You will need a phillips-head screwdriver or Number 2 square drive bit, pliers, to complete this repair.
4
Shock
5
Be Sure To Unplug The Power Cord Or Shut Off The Power Supply.
6
Pull Out The Drawer And Remove The Rack.
7
Sharp
8
Next, Use Pliers To Bend The Slide Rails Outward To Fully Detach The Drawer Assembly ? This May Require Some Effort.
9
Set The Drawer Upside Down On A Sturdy Surface.
10
Use A Phillips-head Screwdriver Or A Number Two Square Drive Bit To Unthread The Screws At The Bottom Of The Front Panel.
11
Turn The Drawer Assembly Over, And Remove The Top Screws.
12
Detach The Drawer From The Front Panel.
13
Sharp
14
Set The Insulation And The Inner Panel Aside.
15
Unthread The Mounting Screws To Release The Drawer Handle.
16
You?re Now Ready To Prepare The New Drawer Front For Installation.
17
Align The Handle On The New Front Panel, Reposition The Support Washers, Then Thread And Tighten The Mounting Screws.
18
Position The Inner Panel And The Insulation.
19
Align The Drawer On The Front Panel, And Rethread The Top Screws.
20
Turn The Drawer Assembly Over, And Rethread The Bottom Screws.
21
With Both Slide Rails Pulled Out, Align The Slots In The Drawer Assembly With The Tabs On The Slide Rails And Snap The Assembly Into Position.
22
Plug The Power Cord Back In Or Restore The Power Supply.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com