Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Regulator Valve Replacement #W10861656 
KitchenAid Convection Gas Range Regulator Valve Replacement #W10861656
Skill Level
Total Parts Cost
$197.95Estimated Savings
$112.5005:17
- Description
This video provides step-by-step repair instructions for replacing the gas regulator valve on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the valve is if the burners and oven will not light.
This regulator valve replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This regulator valve replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Gas Regulator Valve Replacement
3
You will need a phillips-head screwdriver and an adjustable wrench to complete this repair.
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Unthread the gas supply line from the regulator.
10
For better access to replace the regulator valve, use a phillips-head screwdriver to unthread the two screws securing the lower rear access panel.
11
Sharp
12
Lift the panel up and out to remove.
13
Using a 9/16th inch wrench, unthread the nut securing the broil supply tube to the valve.
14
Use an adjustable wrench to unthread the nut securing the manifold gas supply tube to the valve.
15
Next, unthread the mounting screws securing the regulator valve to the back panel.
16
Note the orientation of the regulator wires?then disconnect them.
17
Prepare the new gas regulator valve for installation, by tranferring the fitting from the old valve to the new one.
18
Apply new thread sealant to the threads of the fitting.
19
Be aware ? if you range uses liquid propane, you will need to reverse the regulator cap.
20
Unthread the cap, turn it over, and thread the opposite end into the regulator.
21
Connect the wire connecters to the appropriate terminals.
22
Align the valve on the back panel so the orifice tube is inserted into the bake burner tube?then secure the valve with the mounting screws.
23
Insert the broil supply tube into the regulator valve then thread the nut to secure ? be care not to damage the tube by overtightening the nut.
24
Do the same to secure the manifold gas supply tube to the valve ? again avoid overtightening the nut.
25
Confirm that the new regulator valve is in the ?on? position.
26
Attach the gas supply line to the regulator valve.
27
Turn the gas supply back on and test the connections by applying a non-corrosive leak-detection solution.
28
The solution will bubble is there is a leak.
29
Once you?ve confirmed the connections are secure and leak-free, reinstall the lower access panel by inserting the tabs in the slots first.
30
Lower the panel and secure it with the screws.
31
Plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the gas regulator valve on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the valve is if the burners and oven will not light.
This regulator valve replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This regulator valve replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Gas Regulator Valve Replacement
3
You will need a phillips-head screwdriver and an adjustable wrench to complete this repair.
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Unthread the gas supply line from the regulator.
10
For better access to replace the regulator valve, use a phillips-head screwdriver to unthread the two screws securing the lower rear access panel.
11
Sharp
12
Lift the panel up and out to remove.
13
Using a 9/16th inch wrench, unthread the nut securing the broil supply tube to the valve.
14
Use an adjustable wrench to unthread the nut securing the manifold gas supply tube to the valve.
15
Next, unthread the mounting screws securing the regulator valve to the back panel.
16
Note the orientation of the regulator wires?then disconnect them.
17
Prepare the new gas regulator valve for installation, by tranferring the fitting from the old valve to the new one.
18
Apply new thread sealant to the threads of the fitting.
19
Be aware ? if you range uses liquid propane, you will need to reverse the regulator cap.
20
Unthread the cap, turn it over, and thread the opposite end into the regulator.
21
Connect the wire connecters to the appropriate terminals.
22
Align the valve on the back panel so the orifice tube is inserted into the bake burner tube?then secure the valve with the mounting screws.
23
Insert the broil supply tube into the regulator valve then thread the nut to secure ? be care not to damage the tube by overtightening the nut.
24
Do the same to secure the manifold gas supply tube to the valve ? again avoid overtightening the nut.
25
Confirm that the new regulator valve is in the ?on? position.
26
Attach the gas supply line to the regulator valve.
27
Turn the gas supply back on and test the connections by applying a non-corrosive leak-detection solution.
28
The solution will bubble is there is a leak.
29
Once you?ve confirmed the connections are secure and leak-free, reinstall the lower access panel by inserting the tabs in the slots first.
30
Lower the panel and secure it with the screws.
31
Plug the power cord back in or restore the power supply.
Applicable Product Model
Parts Needed
Valve and Pressure Regulator
$197.95
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com