Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Convection Fan Assembly Replacement #W11048093 
KitchenAid Convection Gas Range Convection Fan Assembly Replacement #W11048093
Skill Level
Total Parts Cost
$87.94Estimated Savings
$112.5003:20
- Description
This video provides step-by-step repair instructions for replacing the convection fan assembly on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the assembly is if the convection function is not operating properly.
This fan assembly replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This fan assembly replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Convection Fan Assembly Replacement
3
You Will Need A Phillips-head Screwdriver To Complete This Repair.
4
Shock
5
Unplug The Power Cord Or Shut Off The Power Supply.
6
Fully Open The Oven Door, And Rotate Both Door Hinge Locks Back.
7
Heavy
8
Partially Close The Door?then Lift And Pull The Door Toward You To Remove.
9
With The Handle Side Down, Set The Door On A Blanket.
10
Slide Out The Oven Racks.
11
Note The Orientation Of The Convection Fan Cover Then Use A Phillips-head Screwdriver To Unthread The Screws To Release The Cover From The Rear Panel.
12
Next, Unthread The Three Mounting Screws To Release The Fan Assembly.
13
Disconnect The Two Heater Wires As Well As The Motor Wire Connecter And You Can Remove The Old Assembly.
14
Install The New Convection Fan Assembly, By First Connecting The Motor Wire Connecter And The Heater Wires.
15
Align The Assembly On The Rear Panel And Replace The Three Mounting Screws.
16
Reposition The Cover And Secure It With The Screws.
17
Slide The Oven Racks Into Place.
18
Reinstall The Oven Door By Inserting The Door Hinges Into The Hinge Slots At A Forty-five Degree Angle.
19
Lower The Door To Its Fully Open Position, Then Rotate The Hinge Locks Forward.
20
Plug The Power Cord Back In Or Restore The Power Supply?
Description
This video provides step-by-step repair instructions for replacing the convection fan assembly on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the assembly is if the convection function is not operating properly.
This fan assembly replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This fan assembly replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection gas range - ksgb900ess1
2
Kitchenaid convection gas range - Convection Fan Assembly Replacement
3
You Will Need A Phillips-head Screwdriver To Complete This Repair.
4
Shock
5
Unplug The Power Cord Or Shut Off The Power Supply.
6
Fully Open The Oven Door, And Rotate Both Door Hinge Locks Back.
7
Heavy
8
Partially Close The Door?then Lift And Pull The Door Toward You To Remove.
9
With The Handle Side Down, Set The Door On A Blanket.
10
Slide Out The Oven Racks.
11
Note The Orientation Of The Convection Fan Cover Then Use A Phillips-head Screwdriver To Unthread The Screws To Release The Cover From The Rear Panel.
12
Next, Unthread The Three Mounting Screws To Release The Fan Assembly.
13
Disconnect The Two Heater Wires As Well As The Motor Wire Connecter And You Can Remove The Old Assembly.
14
Install The New Convection Fan Assembly, By First Connecting The Motor Wire Connecter And The Heater Wires.
15
Align The Assembly On The Rear Panel And Replace The Three Mounting Screws.
16
Reposition The Cover And Secure It With The Screws.
17
Slide The Oven Racks Into Place.
18
Reinstall The Oven Door By Inserting The Door Hinges Into The Hinge Slots At A Forty-five Degree Angle.
19
Lower The Door To Its Fully Open Position, Then Rotate The Hinge Locks Forward.
20
Plug The Power Cord Back In Or Restore The Power Supply?
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com