Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenAid Convection Gas Range Spark Electrode Clip Replacement #W11190173 
KitchenAid Convection Gas Range Spark Electrode Clip Replacement #W11190173
Skill Level
Total Parts Cost
$7.68Estimated Savings
$112.5006:00
- Description
This video provides step-by-step repair instructions for replacing the spark electrode clip on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the electrode clip is if the electrode is not secured to the orifice.
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step By Step Instructions
1
Convection Gas Range - Ksgb900ess1
2
Kitchenaid convection gas range - Spark Electrode Clip replacement
3
You will need a flat-head screwdriver and a phillips-head screwdriver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the oven door, and use a phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Next, unthread the two screws securing the control panel to the frame.
13
Detach the control panel and support it to avoid straining the wires.
14
Now unthread the front bracket screws securing the main top.
15
Unthread the two screws underneath the rear corners of the top.
16
Heavy
17
Lift off both grates.
18
Remove all five burner caps and burner bases.
19
You can now unthread the screws securing the orifice holders to the main top.
20
Sharp
21
With the screws unthreaded, you can lift off the top.
22
Slide out the old retaining clip if still intact.
23
When installing the new retaining clip, make sure the electrode is properly positioned in the orifice holder, then slide in the new clip to secure.
24
Reposition the main top on the frame so the spark electrodes protrude through the holes in the top.
25
Confirm that the orifice holders are aligned?then thread and tighten the screws to secure the holders to the main top.
26
Replace each burner base in its proper location by aligning the notch in the base with the spark electrode.
27
Replace the burner caps.
28
Reposition the grates.
29
Thread the two rear screws to secure the main top.
30
Replace the front bracket screws.
31
Realign the control panel on the front brackets.
32
Secure it with the screws.
33
Replace the lower cover, then thread the screws to secure.
34
Realign the control knobs on the valve stems and push them into place ? note that the power burner control knob should be placed on the second stem from the left.
35
Turn the gas supply back on.
36
Plug the power cord back in or restore the power supply.
Description
This video provides step-by-step repair instructions for replacing the spark electrode clip on a Kitchenaid Gas Convection Range (model #KSGB900ESS01). The most common reason for replacing the electrode clip is if the electrode is not secured to the orifice.
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
This electrode replacement video is applicable to the following brands:
Whirlpool, Kitchenaid
Don't forget to like and comment on this video and subscribe to our channel!
Step-By-Step Instructions
1
Convection Gas Range - Ksgb900ess1
2
Kitchenaid convection gas range - Spark Electrode Clip replacement
3
You will need a flat-head screwdriver and a phillips-head screwdriver to complete this repair.
4
Shock
5
Unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Open the oven door, and use a phillips-head screwdriver to unthread the screws securing the control panel?s lower cover.
9
Sharp
10
Remove the cover.
11
Pull off the five control knobs.
12
Next, unthread the two screws securing the control panel to the frame.
13
Detach the control panel and support it to avoid straining the wires.
14
Now unthread the front bracket screws securing the main top.
15
Unthread the two screws underneath the rear corners of the top.
16
Heavy
17
Lift off both grates.
18
Remove all five burner caps and burner bases.
19
You can now unthread the screws securing the orifice holders to the main top.
20
Sharp
21
With the screws unthreaded, you can lift off the top.
22
Slide out the old retaining clip if still intact.
23
When installing the new retaining clip, make sure the electrode is properly positioned in the orifice holder, then slide in the new clip to secure.
24
Reposition the main top on the frame so the spark electrodes protrude through the holes in the top.
25
Confirm that the orifice holders are aligned?then thread and tighten the screws to secure the holders to the main top.
26
Replace each burner base in its proper location by aligning the notch in the base with the spark electrode.
27
Replace the burner caps.
28
Reposition the grates.
29
Thread the two rear screws to secure the main top.
30
Replace the front bracket screws.
31
Realign the control panel on the front brackets.
32
Secure it with the screws.
33
Replace the lower cover, then thread the screws to secure.
34
Realign the control knobs on the valve stems and push them into place ? note that the power burner control knob should be placed on the second stem from the left.
35
Turn the gas supply back on.
36
Plug the power cord back in or restore the power supply.
Applicable Product Model
Related Articles & Videos
09:43
Part Replacement
KitchenAid Convection Gas Range Cooling Fan Assembly Replacement #W11107275
08:32
Part Replacement
KitchenAid Convection Gas Range Main Control Board Replacement #W11100100
05:52
Part Replacement
KitchenAid Convection Gas Range Control Panel Replacement #W10913685
07:53
Part Replacement
KitchenAid Convection Gas Range Right Rear Burner Spark Electrode Replacement #W11220383
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com