Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60 
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
Skill Level
Total Parts Cost
$69.94Estimated Savings
$112.5007:46
- Description
This video provides step-by-step instructions for replacing the bake burner tube igniter on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the igniter is if the bake burner will not light properly.
All of the information in this igniter replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this igniter replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Bake Burner Tube Igniter Replacement
3
Tools needed: Phillips-head screwdriver or a quarter-inch nut driver, 5/16th inch nut driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Next, unthread the three screws to release the lower access covers.
13
With the covers removed, you can disconnect the bake burner tube igniter wire connecter.
14
If you?re replacing the igniter in the lower oven, lift up the front of the appliance and support it in the center.
15
Now unthread the two lower screws securing the door retaining brackets to the frame.
16
Open the door and unthread the upper screws securing the door retaining brackets.
17
Rotate the hinge locks back.
18
Loosen the brackets and use tape to help secure them to the door.
19
Heavy
20
Partially close the door, then lift and pull the door toward you to remove.
21
Remove the support and lower the appliance.
22
Remove the oven racks.
23
Sharp
24
Slide the bake burner tube cover to the left and lift up to remove.
25
Unthread the wing nut and remove the shields.
26
Unthread the screw securing the orifice cover and remove the cover.
27
Next, unthread the burner tube mounting screw.
28
Now slide the burner assembly to the right and lift up the front of the tube to detach.
29
Use a 5/16th inch nut driver to unthread the screws to release the old igniter from the tube.
30
Install the new igniter by aligning it on the burner tube, then thread the screws to secure.
31
Feed the igniter wire through the oven?s rear panel, then align the orifice in the burner tube as you insert the front tab into the slot in the base.
32
Slide the assembly to the left, then thread the burner tube mounting screw.
33
Reposition the orifice cover and secure it with the screw.
34
Realign the shields then thread the wing nut.
35
Reposition the bake burner cover and slide it to the right to lock it into place.
36
Replace the oven racks.
37
Support the front the range, then reinstall the door by inserting the hinges into the hinge slots.
38
Reposition the retaining brackets and rotate the hinge locks forward.
39
Rethread the upper screws to secure the brackets.
40
Close the door and thread the two lower screws to fully secure the retaining brackets.
41
Remove the support and lower the range.
42
Returning to the rear of the appliance, connect the igniter wire connecter.
43
Align the access covers and secure them with the screws.
44
Reposition the rear access panel.
45
Thread and tighten the screws to secure.
46
You can replace the bake burner tube igniter in the upper oven in the same manner as the lower oven, but you won?t need to remove the door.
47
With the repair completed, turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the bake burner tube igniter on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the igniter is if the bake burner will not light properly.
All of the information in this igniter replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this igniter replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Bake Burner Tube Igniter Replacement
3
Tools needed: Phillips-head screwdriver or a quarter-inch nut driver, 5/16th inch nut driver
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Next, unthread the three screws to release the lower access covers.
13
With the covers removed, you can disconnect the bake burner tube igniter wire connecter.
14
If you?re replacing the igniter in the lower oven, lift up the front of the appliance and support it in the center.
15
Now unthread the two lower screws securing the door retaining brackets to the frame.
16
Open the door and unthread the upper screws securing the door retaining brackets.
17
Rotate the hinge locks back.
18
Loosen the brackets and use tape to help secure them to the door.
19
Heavy
20
Partially close the door, then lift and pull the door toward you to remove.
21
Remove the support and lower the appliance.
22
Remove the oven racks.
23
Sharp
24
Slide the bake burner tube cover to the left and lift up to remove.
25
Unthread the wing nut and remove the shields.
26
Unthread the screw securing the orifice cover and remove the cover.
27
Next, unthread the burner tube mounting screw.
28
Now slide the burner assembly to the right and lift up the front of the tube to detach.
29
Use a 5/16th inch nut driver to unthread the screws to release the old igniter from the tube.
30
Install the new igniter by aligning it on the burner tube, then thread the screws to secure.
31
Feed the igniter wire through the oven?s rear panel, then align the orifice in the burner tube as you insert the front tab into the slot in the base.
32
Slide the assembly to the left, then thread the burner tube mounting screw.
33
Reposition the orifice cover and secure it with the screw.
34
Realign the shields then thread the wing nut.
35
Reposition the bake burner cover and slide it to the right to lock it into place.
36
Replace the oven racks.
37
Support the front the range, then reinstall the door by inserting the hinges into the hinge slots.
38
Reposition the retaining brackets and rotate the hinge locks forward.
39
Rethread the upper screws to secure the brackets.
40
Close the door and thread the two lower screws to fully secure the retaining brackets.
41
Remove the support and lower the range.
42
Returning to the rear of the appliance, connect the igniter wire connecter.
43
Align the access covers and secure them with the screws.
44
Reposition the rear access panel.
45
Thread and tighten the screws to secure.
46
You can replace the bake burner tube igniter in the upper oven in the same manner as the lower oven, but you won?t need to remove the door.
47
With the repair completed, turn the gas supply back on, plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Related Articles & Videos
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com