Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Electric Range Control Panel Replacement #W11177672 
Kitchenaid Double Oven Electric Range Control Panel Replacement #W11177672
Skill Level
Total Parts Cost
$221.69Estimated Savings
$112.5004:16
- Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Before you replace the control panel on your electric range…
2
…be sure to shut off the power supply to the outlet or junction box.
3
Pull the range away from the wall so you can access the rear of the appliance.
4
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
5
Next, unthread the upper screws securing the panel.
6
Disconnect the wire connecter from the control board to fully release the panel.
7
Use the phillips-head screwdriver to unthread the four mounting screws securing the switch and control board assembly – make sure the loose screws don’t fall behind the lower rear access panel.
8
Carefully detach the assembly and support it to avoid straining the wires.
9
Next, place tape over the back edge of the cooktop to protect it.
10
Now use a short or off-set phillips-head screwdriver to unthread the lower screws securing the control panel.
11
Unthread the upper rear screws and you can fully remove the old panel.
12
Install the new control panel…
13
…by aligning it on the support brackets.
14
Thread and tighten the upper and lower screws to secure.
15
Remove any tape from the back edge of the cooktop.
16
Reposition the switch and control board assembly by aligning the upper tabs with the notches at the top of the control panel.
17
Hold the assembly in place as you thread and tighten the four mounting screws.
18
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
19
Align the panel and replace the upper screws.
20
Realign the brace then thread the lower screws.
21
Restore power to the outlet or junction box…
22
…and the electric range should be ready for use.
Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid double oven electric range (model #KFED500ESS02). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Before you replace the control panel on your electric range…
2
…be sure to shut off the power supply to the outlet or junction box.
3
Pull the range away from the wall so you can access the rear of the appliance.
4
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
5
Next, unthread the upper screws securing the panel.
6
Disconnect the wire connecter from the control board to fully release the panel.
7
Use the phillips-head screwdriver to unthread the four mounting screws securing the switch and control board assembly – make sure the loose screws don’t fall behind the lower rear access panel.
8
Carefully detach the assembly and support it to avoid straining the wires.
9
Next, place tape over the back edge of the cooktop to protect it.
10
Now use a short or off-set phillips-head screwdriver to unthread the lower screws securing the control panel.
11
Unthread the upper rear screws and you can fully remove the old panel.
12
Install the new control panel…
13
…by aligning it on the support brackets.
14
Thread and tighten the upper and lower screws to secure.
15
Remove any tape from the back edge of the cooktop.
16
Reposition the switch and control board assembly by aligning the upper tabs with the notches at the top of the control panel.
17
Hold the assembly in place as you thread and tighten the four mounting screws.
18
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
19
Align the panel and replace the upper screws.
20
Realign the brace then thread the lower screws.
21
Restore power to the outlet or junction box…
22
…and the electric range should be ready for use.
Applicable Product Model
Related Articles & Videos
04:43
Part Replacement
Kitchenaid Double Oven Gas Range Control Panel Replacement #W11177672
05:40
Part Replacement
Kitchenaid Double Oven Electric Range Bake Element Replacement #WPW10249981
01:24
Part Replacement
Kitchenaid Double Oven Electric Range Control Knob Bezel Replacement #W10645811
03:29
Part Replacement
Kitchenaid Double Oven Electric Range Door Lock Assembly Replacement #W11166856
03:03
Part Replacement
Kitchenaid Double Oven Electric Range High Limit Thermostat Replacement #WP7403P899-60
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com