Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Control Panel Replacement #W11177672 
Kitchenaid Double Oven Gas Range Control Panel Replacement #W11177672
Skill Level
Total Parts Cost
$221.69Estimated Savings
$112.5004:43
- Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Control Panel replacement
3
You will need a phillips-head screwdriver or a quarter-inch nut driver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Use the phillips-head screwdriver to unthread the four mounting screws securing the switch and control board assembly ? make sure the loose screws don?t fall behind the lower rear access panel.
12
Carefully detach the assembly and support it to avoid straining the wires.
13
Next, place tape over the back edge of the cooktop to protect it.
14
Now use a short or off-set phillips-head screwdriver to unthread the lower screws securing the control panel.
15
Unthread the upper rear screws and you can fully remove the old panel.
16
Install the new control panel, by aligning it on the support brackets.
17
Thread and tighten the upper and lower screws to secure.
18
Remove any tape from the back edge of the cooktop.
19
Reposition the switch and control board assembly by aligning the upper tabs with the notches at the top of the control panel.
20
Hold the assembly in place as you thread and tighten the four mounting screws.
21
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
22
Align the panel and replace the upper screws.
23
Realign the brace then thread the lower screws.
24
Restore power to the outlet or junction box.
Description
This video provides step-by-step instructions for replacing the control panel on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the panel is if it is damaged.
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this panel replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
Double Oven Electric Range - Model KFED500ESS02
2
Kitchenaid double oven electric range - Control Panel replacement
3
You will need a phillips-head screwdriver or a quarter-inch nut driver to complete this repair.
4
Shock
5
Shut off the power supply to the outlet or junction box.
6
Pull the range away from the wall so you can access the rear of the appliance.
7
Use a phillips-head screwdriver or a quarter-inch nut driver to unthread the lower screws to release the upper rear access panel brace.
8
Sharp
9
Next, unthread the upper screws securing the panel.
10
Disconnect the wire connecter from the control board to fully release the panel.
11
Use the phillips-head screwdriver to unthread the four mounting screws securing the switch and control board assembly ? make sure the loose screws don?t fall behind the lower rear access panel.
12
Carefully detach the assembly and support it to avoid straining the wires.
13
Next, place tape over the back edge of the cooktop to protect it.
14
Now use a short or off-set phillips-head screwdriver to unthread the lower screws securing the control panel.
15
Unthread the upper rear screws and you can fully remove the old panel.
16
Install the new control panel, by aligning it on the support brackets.
17
Thread and tighten the upper and lower screws to secure.
18
Remove any tape from the back edge of the cooktop.
19
Reposition the switch and control board assembly by aligning the upper tabs with the notches at the top of the control panel.
20
Hold the assembly in place as you thread and tighten the four mounting screws.
21
Reinstall the upper rear access panel by first connecting the wire connecter to the control board.
22
Align the panel and replace the upper screws.
23
Realign the brace then thread the lower screws.
24
Restore power to the outlet or junction box.
Applicable Product Model
Related Articles & Videos
04:16
Part Replacement
Kitchenaid Double Oven Electric Range Control Panel Replacement #W11177672
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
06:12
Part Replacement
Kitchenaid Double Oven Gas Range Valve Regulator Assembly Replacement #WPW10546238
05:30
Part Replacement
Kitchenaid Double Oven Gas Range Rear Burner Valve Replacement #W10718182
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com