Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairKitchenaid Double Oven Gas Range Valve Regulator Assembly Replacement #WPW10546238 
Kitchenaid Double Oven Gas Range Valve Regulator Assembly Replacement #WPW10546238
Skill Level
Total Parts Cost
$196.30Estimated Savings
$112.5006:12
- Description
This video provides step-by-step instructions for replacing the valve regulator assembly on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the regulator is if the range will not light.
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step By Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Safety Valve & Regulator Replacement
3
Tools needed: Phillips-head screwdriver or a nut quarter-inch nut driver, adjustable wrench
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a nut quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Detach the regulator cover.
13
Unthread the gas supply line from the regulator.
14
Use an adjustable wrench to unthread the nuts securing the gas supply tubes to the regulator and the two safety valves.
15
Note the orientation of the wires connected to the safety valves, then disconnect them.
16
Next, use a phillips-head screwdriver or a quarter-inch nut driver to unthread the mounting screws securing the upper safety valve and regulator to the rear panel.
17
Remove the old assembly.
18
Prepare the new safety valve and regulator assembly for installation by tranferring the fitting from the old regulator to the new one.
19
Apply new thread sealant to the threads of the fitting.
20
Be aware ? if you range uses liquid propane, you will need to reverse the regulator cap.
21
Unthread the cap, turn it over, and thread the opposite end into the regulator.
22
Align the new assembly on the rear panel and secure it with the mounting screws.
23
Connect the wires to the appropriate terminals on the safety valves.
24
Secure the gas supply tubes to the regulator and the two safety valves by threading and tightening the nuts ? be careful not to damage the tubes by overtightening.
25
Confirm that the new regulator is in the ?on? position.
26
Attach the gas supply line to the regulator.
27
Turn the gas supply back on and test the connections by applying a non-corrosive leak-detection solution.
28
The solution will bubble is there is a leak.
29
Once you?ve confirmed the connections are secure and leak-free, reattach the regulator cover.
30
Reposition the rear access panel.
31
Thread and tighten the screws to secure.
32
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the valve regulator assembly on a Kitchenaid double oven gas range (model #KFGD500ESS04). The most common reason for replacing the regulator is if the range will not light.
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
All of the information in this regulator replacement video is applicable to the following brands: Maytag, Amana, Magic Chef, Whirlpool, Tappan, Estate, Kitchenaide
Step-By-Step Instructions
1
KitchenAid Double Oven Gas Range - KFGD500ESS04
2
Gas Range Safety Valve & Regulator Replacement
3
Tools needed: Phillips-head screwdriver or a nut quarter-inch nut driver, adjustable wrench
4
Shock
5
Be sure to unplug the power cord or shut off the power supply.
6
Fire
7
Shut off the gas supply as well.
8
Pull the range away from the wall so you can access the rear of the appliance.
9
Use a Phillips-head screwdriver or a nut quarter-inch nut driver to unthread all of the screws securing the lower rear access panel.
10
Sharp
11
Lift the panel up and out to remove.
12
Detach the regulator cover.
13
Unthread the gas supply line from the regulator.
14
Use an adjustable wrench to unthread the nuts securing the gas supply tubes to the regulator and the two safety valves.
15
Note the orientation of the wires connected to the safety valves, then disconnect them.
16
Next, use a phillips-head screwdriver or a quarter-inch nut driver to unthread the mounting screws securing the upper safety valve and regulator to the rear panel.
17
Remove the old assembly.
18
Prepare the new safety valve and regulator assembly for installation by tranferring the fitting from the old regulator to the new one.
19
Apply new thread sealant to the threads of the fitting.
20
Be aware ? if you range uses liquid propane, you will need to reverse the regulator cap.
21
Unthread the cap, turn it over, and thread the opposite end into the regulator.
22
Align the new assembly on the rear panel and secure it with the mounting screws.
23
Connect the wires to the appropriate terminals on the safety valves.
24
Secure the gas supply tubes to the regulator and the two safety valves by threading and tightening the nuts ? be careful not to damage the tubes by overtightening.
25
Confirm that the new regulator is in the ?on? position.
26
Attach the gas supply line to the regulator.
27
Turn the gas supply back on and test the connections by applying a non-corrosive leak-detection solution.
28
The solution will bubble is there is a leak.
29
Once you?ve confirmed the connections are secure and leak-free, reattach the regulator cover.
30
Reposition the rear access panel.
31
Thread and tighten the screws to secure.
32
Plug the power cord back in or restore the power supply and the gas range should be ready for use.
Applicable Product Model
Parts Needed
Valve and Pressure Regulator
$196.30
Recommended Tools and Accessories
Cooktop Cleaner
$29.50
Total$0.00
Related Articles & Videos
07:46
Part Replacement
Kitchenaid Double Oven Gas Range Bake Burner Tube Igniter Replacement #WP7432P143-60
05:37
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Valve Replacement #W10718180
01:31
Part Replacement
Kitchenaid Double Oven Gas Range Left Front Burner Base Replacement #WPW10406878
04:10
Part Replacement
Kitchenaid Double Oven Gas Range Broil Igniter Replacement #WPW10324738
06:05
Part Replacement
Kitchenaid Double Oven Gas Range Surface Igniter Replacement #W11208293
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com