Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Drain Tube Extension Replacement WPW10153550 
Whirlpool Barracuda Refrigerator Drain Tube Extension Replacement WPW10153550
Skill Level
Total Parts Cost
$29.50Estimated Savings
$112.5002:23
- Description
This video provides step-by-step repair instructions for replacing the drain tube extension on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Before you replace the drain tube extension in your refrigerator…
2
…be sure to unplug the power cord.
3
Pull the refrigerator away from the wall so you can access the rear of the appliance.
4
Use a quarter-inch socket or nut driver to unthread the screw to release the water inlet line coupler from the lower rear access panel.
5
Unthread all of the screws to release the access panel.
6
Unthread the screw securing the drain tube extension to the cabinet.
7
You can now pull the old extension free of the grommet to remove.
8
Install the new drain tube extension…
9
…by inserting the end with the ridge into the grommet…
10
…then thread the screw.
11
Reinstall the access panel.
12
Be sure to secure the water inlet line coupler to the panel.
13
Plug the power cord back in…
14
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the drain tube extension on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Before you replace the drain tube extension in your refrigerator…
2
…be sure to unplug the power cord.
3
Pull the refrigerator away from the wall so you can access the rear of the appliance.
4
Use a quarter-inch socket or nut driver to unthread the screw to release the water inlet line coupler from the lower rear access panel.
5
Unthread all of the screws to release the access panel.
6
Unthread the screw securing the drain tube extension to the cabinet.
7
You can now pull the old extension free of the grommet to remove.
8
Install the new drain tube extension…
9
…by inserting the end with the ridge into the grommet…
10
…then thread the screw.
11
Reinstall the access panel.
12
Be sure to secure the water inlet line coupler to the panel.
13
Plug the power cord back in…
14
…and your refrigerator should be ready for use.
Applicable Product Model
Related Articles & Videos
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
01:19
Part Replacement
Whirlpool Barracuda Refrigerator Crisper Shelf Frame Replacement W10914556
01:38
Part Replacement
Whirlpool Barracuda Refrigerator Beveled LED Replacement WPW10515057
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com