Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Auger Motor Replacement WPW10317991 
Whirlpool Barracuda Refrigerator Auger Motor Replacement WPW10317991
Skill Level
Total Parts Cost
$80.94Estimated Savings
$112.5003:43
- Description
This video provides step-by-step repair instructions for replacing the auger motor on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the ice maker is not dispensing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice auger motor in your freezer first remove the ice bucket.
3
Next, pull off the light cover and unthread the light bulb.
4
Now remove the mounting screws to release the auger motor bracket.
5
Pull the assembly away from the rear panel and disconnect the wire harness.
6
Remove the auger assembly and set it on a sturdy surface.
7
Use pliers to loosen the coupler by rotating it clockwise then unthread the coupler from the motor shaft.
8
Disconnect the motor wires and the grounding wire.
9
Remove the screws securing the auger motor to the bracket and pull the old motor off.
10
Install the new ice auger motor by positioning it on the bracket then replace the screws to secure.
11
Connect the motor wires and the grounding wire to the new motor.
12
Thread the coupler on the motor shaft counter-clockwise and use pliers to tighten.
13
Return the auger assembly to the freezer and connect the wire harness.
14
Align the assembly on the mounting posts and replace the screws to secure.
15
Thread the light bulb into place and snap on the light cover.
16
Replace the ice bucket by aligning it on the rails and sliding it into place.
17
If you have trouble positioning the bucket you can rotate the auger to fully seat the drive coupler.
18
You’re now ready to plug the power cord back in and confirm that the new auger motor is working properly.
Description
This video provides step-by-step repair instructions for replacing the auger motor on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the ice maker is not dispensing ice.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
As with any repair, you should unplug the power cord before beginning.
2
To replace the ice auger motor in your freezer first remove the ice bucket.
3
Next, pull off the light cover and unthread the light bulb.
4
Now remove the mounting screws to release the auger motor bracket.
5
Pull the assembly away from the rear panel and disconnect the wire harness.
6
Remove the auger assembly and set it on a sturdy surface.
7
Use pliers to loosen the coupler by rotating it clockwise then unthread the coupler from the motor shaft.
8
Disconnect the motor wires and the grounding wire.
9
Remove the screws securing the auger motor to the bracket and pull the old motor off.
10
Install the new ice auger motor by positioning it on the bracket then replace the screws to secure.
11
Connect the motor wires and the grounding wire to the new motor.
12
Thread the coupler on the motor shaft counter-clockwise and use pliers to tighten.
13
Return the auger assembly to the freezer and connect the wire harness.
14
Align the assembly on the mounting posts and replace the screws to secure.
15
Thread the light bulb into place and snap on the light cover.
16
Replace the ice bucket by aligning it on the rails and sliding it into place.
17
If you have trouble positioning the bucket you can rotate the auger to fully seat the drive coupler.
18
You’re now ready to plug the power cord back in and confirm that the new auger motor is working properly.
Applicable Product Model
Parts Needed
Auger Motor
$80.94
Total$0.00
Related Articles & Videos
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com