Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Dispenser Fill Tube Replacement WPW10397435 
Whirlpool Barracuda Refrigerator Dispenser Fill Tube Replacement WPW10397435
Skill Level
Total Parts Cost
$94.77Estimated Savings
$112.5004:30
- Description
This video provides step-by-step repair instructions for replacing the dispenser fill tube on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Before you replace the water dispenser fill tube in your refrigerator…
2
…be sure to unplug the power cord.
3
Open both doors…
4
…along with the water filter cover.
5
Pull the toe-kick plate free.
6
Use a quarter-inch socket or nut driver to unthread the screw to release the dispenser fill tube retainer from the frame.
7
Remove the retainer.
8
Unthread the screw securing the wire connecter support bracket.
9
Move the bracket out of the way.
10
Now use a small flat-head screwdriver to remove the locking clip securing the dispenser fill tube to the coupler.
11
You can use a 7/16th inch wrench to help depress the retaining ring to release the tube.
12
Use the small flat-head screwdriver to release the tabs so you can detach the dispenser control board.
13
Depress the tab to disconnect the wire connecter.
14
Cut the zip tie securing the dispenser fill tube to the ice door assembly.
15
You can now pull the old fill tube through the freezer door.
16
Install the new dispenser fill tube…
17
…by feeding the end without the fitting through the sleeve in the freezer door.
18
To help guide the fill tube, you can first insert a 7-connecter thermostat wire, or wire with a similar circumference, through the bottom of the door until it appears at the sleeve opening.
19
Now insert the wire into the new fill tube and use it to pull the tube all of the way through the sleeve.
20
Push the wire grommet back in to the sleeve opening
21
Position the new fill tube.
22
Secure it with a new zip tie.
23
Fully insert the opposite end into the coupler…
24
…and insert the locking clip to secure.
25
Reposition the wire connecter support bracket.
26
Thread the screw to secure it.
27
Align the retainer on the tube and secure it to the frame with the screw.
28
Reinstall the toe-kick plate by aligning the clips on the plate with the brackets attached to refrigerator frame then snap the plate into place.
29
Close the water filter cover.
30
Reinstall the dispenser control board by connecting the wire connecter…
31
…then insert the upper tabs into the slots in the housing and snap the bottom of the control board into place.
32
Plug the power cord back in…
33
…and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the dispenser fill tube on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is leaking.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Before you replace the water dispenser fill tube in your refrigerator…
2
…be sure to unplug the power cord.
3
Open both doors…
4
…along with the water filter cover.
5
Pull the toe-kick plate free.
6
Use a quarter-inch socket or nut driver to unthread the screw to release the dispenser fill tube retainer from the frame.
7
Remove the retainer.
8
Unthread the screw securing the wire connecter support bracket.
9
Move the bracket out of the way.
10
Now use a small flat-head screwdriver to remove the locking clip securing the dispenser fill tube to the coupler.
11
You can use a 7/16th inch wrench to help depress the retaining ring to release the tube.
12
Use the small flat-head screwdriver to release the tabs so you can detach the dispenser control board.
13
Depress the tab to disconnect the wire connecter.
14
Cut the zip tie securing the dispenser fill tube to the ice door assembly.
15
You can now pull the old fill tube through the freezer door.
16
Install the new dispenser fill tube…
17
…by feeding the end without the fitting through the sleeve in the freezer door.
18
To help guide the fill tube, you can first insert a 7-connecter thermostat wire, or wire with a similar circumference, through the bottom of the door until it appears at the sleeve opening.
19
Now insert the wire into the new fill tube and use it to pull the tube all of the way through the sleeve.
20
Push the wire grommet back in to the sleeve opening
21
Position the new fill tube.
22
Secure it with a new zip tie.
23
Fully insert the opposite end into the coupler…
24
…and insert the locking clip to secure.
25
Reposition the wire connecter support bracket.
26
Thread the screw to secure it.
27
Align the retainer on the tube and secure it to the frame with the screw.
28
Reinstall the toe-kick plate by aligning the clips on the plate with the brackets attached to refrigerator frame then snap the plate into place.
29
Close the water filter cover.
30
Reinstall the dispenser control board by connecting the wire connecter…
31
…then insert the upper tabs into the slots in the housing and snap the bottom of the control board into place.
32
Plug the power cord back in…
33
…and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Fill Tube
$94.77
Total$0.00
Related Articles & Videos
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
01:19
Part Replacement
Whirlpool Barracuda Refrigerator Crisper Shelf Frame Replacement W10914556
01:38
Part Replacement
Whirlpool Barracuda Refrigerator Beveled LED Replacement WPW10515057
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com