Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Door Handle Mounting Stud Replacement WPW10661886 
Whirlpool Barracuda Refrigerator Door Handle Mounting Stud Replacement WPW10661886
Skill Level
Total Parts Cost
$13.54Estimated Savings
$112.5001:26
- Description
This video provides step-by-step repair instructions for replacing the door handle mounting stud on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Handle Mounting Stud Replacement
3
Tools needed: 1/8th inch Allen wrench or bit, Phillips-head screwdriver
4
Use a 1/8th inch Allen wrench or bit to loose the two door handle set screws ? be careful not to scratch the surface of the freezer door.
5
With the screws loosened, lift the handle off of the mounting studs.
6
Use a Phillips-head screwdriver to unthread the old stud if still intact.
7
Install the new handle mounting stud by threading it into the door.
8
Realign the handle on the studs and then tighten the set screws.
Description
This video provides step-by-step repair instructions for replacing the door handle mounting stud on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Sidekick Freezer - WSZ57L18DM00
2
Freezer Handle Mounting Stud Replacement
3
Tools needed: 1/8th inch Allen wrench or bit, Phillips-head screwdriver
4
Use a 1/8th inch Allen wrench or bit to loose the two door handle set screws ? be careful not to scratch the surface of the freezer door.
5
With the screws loosened, lift the handle off of the mounting studs.
6
Use a Phillips-head screwdriver to unthread the old stud if still intact.
7
Install the new handle mounting stud by threading it into the door.
8
Realign the handle on the studs and then tighten the set screws.
Applicable Product Model
Parts Needed
Handle Screw
$13.54
Total$0.00
Related Articles & Videos
01:19
Part Replacement
KitchenAid 5 Door Refrigerator Handle Mounting Stud Replacement WPW10661886
01:11
Part Replacement
Whirlpool Sidekick Freezer Handle Mounting Stud Replacement WPW10661886
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com