DescriptionThis video provides step-by-step repair instructions for replacing the water filter on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04).
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions1
To replace the water filter in your refrigerator…
2
…open the cover and pull the old filter straight out.
3
Before you install the new water filter…
4
…remove the protective cap.
5
With the arrow on the bottom facing left, insert the filter into the housing then close the cover.
6
Be aware you should run water through the system to flush out the lines before drinking.