Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Freezer Door Closing Cam Replacement WP2223751 
Whirlpool Barracuda Refrigerator Freezer Door Closing Cam Replacement WP2223751
Skill Level
Total Parts Cost
$7.94Estimated Savings
$112.5004:53
- Description
This video provides step-by-step repair instructions for replacing the freezer door closing cam on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Before you replace the freezer door closing cam on your refrigerator,
2
Be sure to unplug the power cord.
3
Open both doors along with the water filter cover.
4
Pull the toe kick plate free.
5
Disconnect the dispenser harness wires.
6
Use a quarter inch socket or nut driver to unthread the screw to release the water dispenser wire retainer from the frame.
7
Remove the retainer.
8
Unthread the screws securing the wire connectors support bracket.
9
Next, unthread the screw to release the dispenser fill tube retainer from the frame.
10
Remove the retainer.
11
Now use a small flat-head screwdriver to remove the locking clip securing the dispenser fill tube to the coupler.
12
You can use a 7/16 inch wrench to help depress the retaining ring to release the tube.
13
Support the door, then use a 3/16 inch Allen wrench or a T30 Torx bit to unthread the two screws securing the upper door hinge.
14
Remove the hinge and have an assistant help you to lift the door off of the lower hinge.
15
Using a 5/16 inch socket or nut driver, unthread the screws securing the closing cam to the hinge.
16
Lift off the old cam.
17
Install the new closing cam by aligning it on the hinge, then thread the screw to secure.
18
Reinstall the freezer door by first feeding the wire harness and water line through the hole in the lower hinge.
19
Align the door on the hinge and close.
20
Reposition the upper hinge and thread the screws to secure.
21
Fully insert the dispenser waterline into the coupler and insert the locking clip to secure.
22
Realign the retainer on the tube and secure it to the frame with the screw.
23
Position the retainer on the water dispenser wire, then rethread the screw to secure the retainer to the frame.
24
Reposition the wire connectors support bracket and thread the screw.
25
Reconnect the dispenser harness wires.
26
Reinstall the toe kick plate by aligning the clips on the plate with the brackets attached to the refrigerator frame, then snap the plate into place.
27
Close the water filter cover.
28
Plug the power cord back in, and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the freezer door closing cam on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if it is damaged or missing.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Before you replace the freezer door closing cam on your refrigerator,
2
Be sure to unplug the power cord.
3
Open both doors along with the water filter cover.
4
Pull the toe kick plate free.
5
Disconnect the dispenser harness wires.
6
Use a quarter inch socket or nut driver to unthread the screw to release the water dispenser wire retainer from the frame.
7
Remove the retainer.
8
Unthread the screws securing the wire connectors support bracket.
9
Next, unthread the screw to release the dispenser fill tube retainer from the frame.
10
Remove the retainer.
11
Now use a small flat-head screwdriver to remove the locking clip securing the dispenser fill tube to the coupler.
12
You can use a 7/16 inch wrench to help depress the retaining ring to release the tube.
13
Support the door, then use a 3/16 inch Allen wrench or a T30 Torx bit to unthread the two screws securing the upper door hinge.
14
Remove the hinge and have an assistant help you to lift the door off of the lower hinge.
15
Using a 5/16 inch socket or nut driver, unthread the screws securing the closing cam to the hinge.
16
Lift off the old cam.
17
Install the new closing cam by aligning it on the hinge, then thread the screw to secure.
18
Reinstall the freezer door by first feeding the wire harness and water line through the hole in the lower hinge.
19
Align the door on the hinge and close.
20
Reposition the upper hinge and thread the screws to secure.
21
Fully insert the dispenser waterline into the coupler and insert the locking clip to secure.
22
Realign the retainer on the tube and secure it to the frame with the screw.
23
Position the retainer on the water dispenser wire, then rethread the screw to secure the retainer to the frame.
24
Reposition the wire connectors support bracket and thread the screw.
25
Reconnect the dispenser harness wires.
26
Reinstall the toe kick plate by aligning the clips on the plate with the brackets attached to the refrigerator frame, then snap the plate into place.
27
Close the water filter cover.
28
Plug the power cord back in, and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Closing Cam
$7.94
Total$0.00
Related Articles & Videos
05:04
Part Replacement
Whirlpool Barracuda Refrigerator Freezer Door Lower Cam Replacement W10846218
07:30
How This Part Works
Refrigerator/Freezer Door Closing Cam - How it Works & Installation Tips
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com