Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Matrix Refrigerator Condenser Fan Blade Replacement W11193484 
Whirlpool Matrix Refrigerator Condenser Fan Blade Replacement W11193484
Skill Level
Total Parts Cost
$51.61Estimated Savings
$112.5002:24
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Condenser Fan Blade Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
To move the refrigerator away from the wall, raise both front leveling legs.
7
Use a quarter-inch socket or nut driver to unthread all of the screws to release the lower rear access panel.
8
Sharp
9
Reach in and push the old condenser fan blade off of the motor shaft.
10
Install the new condenser fan blade by aligning it on the motor shaft then push until the blade is fully seated.
11
You may need to readjust the fan motor mounting bracket after installation.
12
Reinstall the access panel.
13
Push the refrigerator back against the wall and lower the front leveling legs.
14
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Matrix refrigerator (Model WRT318FMDB02). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Whirlpool Matrix Refrigerator - WRT318FMDB02
2
Refrigerator Condenser Fan Blade Replacement
3
Tools needed: quarter-inch socket or nut driver
4
Shock
5
Be sure to unplug the power cord.
6
To move the refrigerator away from the wall, raise both front leveling legs.
7
Use a quarter-inch socket or nut driver to unthread all of the screws to release the lower rear access panel.
8
Sharp
9
Reach in and push the old condenser fan blade off of the motor shaft.
10
Install the new condenser fan blade by aligning it on the motor shaft then push until the blade is fully seated.
11
You may need to readjust the fan motor mounting bracket after installation.
12
Reinstall the access panel.
13
Push the refrigerator back against the wall and lower the front leveling legs.
14
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$51.61
Total$0.00
Related Articles & Videos
02:05
Part Replacement
Whirlpool Barracuda Refrigerator Condenser Fan Blade Replacement W11193484
03:42
Part Replacement
Whirlpool Matrix Refrigerator Water Supply Line Kit Installation 8003RP
01:09
Part Replacement
Whirlpool Matrix Refrigerator Front Leveling Leg Replacement W10854419
07:18
Part Replacement
Whirlpool Matrix Refrigerator Defrost Heater Replacement WPW10316428
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com