Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairWhirlpool Barracuda Refrigerator Condenser Fan Blade Replacement W11193484 
Whirlpool Barracuda Refrigerator Condenser Fan Blade Replacement W11193484
Skill Level
Total Parts Cost
$51.61Estimated Savings
$112.5002:05
- Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step By Step Instructions
1
Before you replace the condenser fan blade in your refrigerator, be sure to unplug the power cord.
2
Pull the refrigerator away from the wall so you can access the rear of the appliance.
3
Use a quarter inch socket or nut driver to unthread the screw.
4
To release the water inlet line coupler from the lower rear access panel, unthread all of the screws.
5
If still intact, pull the old fan plate off of the condenser motor shaft.
6
Install the new condenser fan blade by lining it on the motor shaft, then push until it is fully seated.
7
Reinstall the access panel.
8
Be sure to secure the water inlet line coupler to the panel.
9
Plug the power cord back in and your refrigerator should be ready for use.
Description
This video provides step-by-step repair instructions for replacing the condenser fan blade on a Whirlpool Barracuda refrigerator (Model WRS325FDAM04). The most common reason for replacing this part is if the refrigerator is noisy.
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
All of the information for this video is applicable to the following brands:
Whirlpool, Maytag, Amana, Kitchenaid, Kenmore
Step-By-Step Instructions
1
Before you replace the condenser fan blade in your refrigerator, be sure to unplug the power cord.
2
Pull the refrigerator away from the wall so you can access the rear of the appliance.
3
Use a quarter inch socket or nut driver to unthread the screw.
4
To release the water inlet line coupler from the lower rear access panel, unthread all of the screws.
5
If still intact, pull the old fan plate off of the condenser motor shaft.
6
Install the new condenser fan blade by lining it on the motor shaft, then push until it is fully seated.
7
Reinstall the access panel.
8
Be sure to secure the water inlet line coupler to the panel.
9
Plug the power cord back in and your refrigerator should be ready for use.
Applicable Product Model
Parts Needed
Condenser Fan Blade
$51.61
Total$0.00
Related Articles & Videos
02:24
Part Replacement
Whirlpool Matrix Refrigerator Condenser Fan Blade Replacement W11193484
04:33
Part Replacement
Whirlpool Barracuda Refrigerator Water Filter Housing Replacement W10862461
01:14
Part Replacement
Whirlpool Barracuda Refrigerator Top Liner LED Replacement WPW10515058
00:53
Part Replacement
Whirlpool Barracuda Refrigerator Meat Drawer Shelf Replacement W11223835
01:19
Part Replacement
Whirlpool Barracuda Refrigerator Crisper Shelf Frame Replacement W10914556
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com