DescriptionThis video provides step-by-step repair instructions for replacing the turntable motor on a Frigidaire microwave oven (Model FFMV1645TSA). The most common reason for replacing this part is if the turntable is not working.
All of the information for this video is applicable to the following brands:
Frigidaire
Step-By-Step Instructions1
Frigidaire Microwave Oven - Model FFMV1645TSA
2
Microwave Oven Turntable Motor Replacement
4
You will need a phillips-head screwdriver for this procedure.
6
Be sure to unplug the power cord or shut off the power supply.
7
Using a phillips-head screwdriver, unthread all of the screws securing the bottom panel.
8
Disconnect the led light wire connecter to fully release the panel.
9
Disconnect the turntable motor wire connecter.
10
Unthread the mounting screws to release the old motor.
11
Install the new turntable motor by aligning the shaft so it inserts into the turntable coupler, then thread the mounting screws.
12
Connect the motor wire connecter.
13
Reinstall the bottom panel by first connecting the led light wire connecter.
14
Realign the panel and rethread the screws.
15
Plug the power cord back in or restore the power supply.
16
Congrats! Your microwave oven is ready for use.