Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairCondenser Fan Motor Replacement (part W10772882) - Jenn-Air Wine Cellar
Condenser Fan Motor Replacement (part W10772882) - Jenn-Air Wine Cellar
Skill Level
Total Parts Cost
$230.47Estimated Savings
$112.5004:41
- Description
This video provides step-by-step repair instructions for replacing the condenser fan motor on a Jenn-Air Wine Cellar (Model JUW24FRECX00). The most common reason for replacing the condenser fan motor is when the refrigerator is not defrosting.
All of the information for this refrigerator condenser fan motor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver, & a 7/32nd inch socket or wrench.
All of the information for this refrigerator condenser fan motor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver, & a 7/32nd inch socket or wrench.
Step By Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX27
2
Wine Cellar Condenser Fan Motor Replacement
3
heavy, sharp, shock, fragile
4
unplug the power cord to the appliance
5
Shock
6
Heavy
7
pull the appliance away from the wall
8
using a phillips-head screwdriver, unthread all of the top mounting screws securing the lower rear access panel
9
unthread the right side mounting screw
10
loosen the three screws on the bottom and lift off the panel
11
Sharp
12
unthread the upper screw and two lower screws securing the condenser fan motor mounting bracket
13
rotate the bracket to remove and disconnect the wire harness
14
unthread all eight screws securing the housing and motor
15
use a 7/32nd inch socket or wrench to unthread the four nuts
16
position the new motor in the housing
17
align the housing on the mounting bracket so the wire will be positioned toward the inside of the appliance
18
thread the screws and nuts to secure
19
connect the wire harness and reposition the mounting bracket
20
rethread the screws to secure
21
reinstall the access panel by aligning it on the bottom screws
22
tighten the screws
23
fully rethread the remaining mounting screws
24
Heavy
25
push the appliance back against the wall
26
Shock
27
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the condenser fan motor on a Jenn-Air Wine Cellar (Model JUW24FRECX00). The most common reason for replacing the condenser fan motor is when the refrigerator is not defrosting.
All of the information for this refrigerator condenser fan motor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver, & a 7/32nd inch socket or wrench.
All of the information for this refrigerator condenser fan motor replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver, & a 7/32nd inch socket or wrench.
Step-By-Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX27
2
Wine Cellar Condenser Fan Motor Replacement
3
heavy, sharp, shock, fragile
4
unplug the power cord to the appliance
5
Shock
6
Heavy
7
pull the appliance away from the wall
8
using a phillips-head screwdriver, unthread all of the top mounting screws securing the lower rear access panel
9
unthread the right side mounting screw
10
loosen the three screws on the bottom and lift off the panel
11
Sharp
12
unthread the upper screw and two lower screws securing the condenser fan motor mounting bracket
13
rotate the bracket to remove and disconnect the wire harness
14
unthread all eight screws securing the housing and motor
15
use a 7/32nd inch socket or wrench to unthread the four nuts
16
position the new motor in the housing
17
align the housing on the mounting bracket so the wire will be positioned toward the inside of the appliance
18
thread the screws and nuts to secure
19
connect the wire harness and reposition the mounting bracket
20
rethread the screws to secure
21
reinstall the access panel by aligning it on the bottom screws
22
tighten the screws
23
fully rethread the remaining mounting screws
24
Heavy
25
push the appliance back against the wall
26
Shock
27
plug the power cord back in
Applicable Product Model
Parts Needed
Condenser Fan Motor
$230.47
Total$0.00
Related Articles & Videos
04:57
How This Part Works
Refrigerator Condenser Fan Motor - How it Works & Installation Tips
07:17
Part Replacement
Evaporator Fan Motor Replacement (part W10854409) - Jenn-Air Wine Cellar
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com