Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairLight Bar Replacement (part W11400015) - Jenn-Air Wine Cellar
Light Bar Replacement (part W11400015) - Jenn-Air Wine Cellar
Skill Level
Total Parts Cost
$64.27Estimated Savings
$112.5004:28
- Description
This video provides step-by-step repair instructions for replacing the light bar on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step By Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX371
2
Wine Cellar Light Bar Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out
12
remove any additional slide rails if necessary, then use a putty knife to detach the light lens
13
peel off the old light bar and disconnect the wire connecter
14
peel the backing off the new light bar and connect the new wire connecter
15
if necessary, use silicone to ensure the lens will hold in place
16
with the beveled portion of the lens aligned with the light bar, snap into position
17
reinstall the control panel assembly by aligning it on the mounting screws and tightening
18
connect the control panel assembly wire connecter, position the wires inside the liner and push the bushing into place
19
replace the tape to cover the wires
20
replace the slide rails
21
reinstall the racks
22
Shock
23
plug the power cord back in
Description
This video provides step-by-step repair instructions for replacing the light bar on a Jenn-Air Wine Cellar (Model JUW24FRECX00).
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
All of the information for this refrigerator control panel replacement video is applicable to the following brands:
Whirlpool, Amana, Jenn-Air, Maytag, KitchenAid, Magic Chef, & Inglis.
Tools used: Phillips-head screwdriver.
Step-By-Step Instructions
1
Jenn-Air Wine Cellar -JUW24FRECX00 - JUW24FRECX371
2
Wine Cellar Light Bar Replacement
3
heavy, sharp, shock, fragile
4
Shock
5
unplug the power cord to the appliance
6
uninstall all of the racks by pulling them forward, lifting the left side stop lever while pushing the right side stop lever down
7
remove the tape covering the control panel wires
8
detach the bushing and disconnect the wire connectors
9
using a phillips-head screwdriver, loosen the four control panel assembly mounting screws
10
detach at least three rack slide rails to remove the control panel assembly
11
lift the assembly out
12
remove any additional slide rails if necessary, then use a putty knife to detach the light lens
13
peel off the old light bar and disconnect the wire connecter
14
peel the backing off the new light bar and connect the new wire connecter
15
if necessary, use silicone to ensure the lens will hold in place
16
with the beveled portion of the lens aligned with the light bar, snap into position
17
reinstall the control panel assembly by aligning it on the mounting screws and tightening
18
connect the control panel assembly wire connecter, position the wires inside the liner and push the bushing into place
19
replace the tape to cover the wires
20
replace the slide rails
21
reinstall the racks
22
Shock
23
plug the power cord back in
Applicable Product Model
Parts Needed
LED Light
$64.27
Total$0.00
Related Articles & Videos
04:41
Part Replacement
Condenser Fan Motor Replacement (part W10772882) - Jenn-Air Wine Cellar
07:17
Part Replacement
Evaporator Fan Motor Replacement (part W10854409) - Jenn-Air Wine Cellar
03:00
Part Replacement
Compressor Relay Replacement (part W10778966) - Jenn-Air Wine Cellar
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com