Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHomelite Leaf Blower Choke Lever Replacement (521850002)
Homelite Leaf Blower Choke Lever Replacement (521850002)
Skill Level
Total Parts Cost
$0.57Estimated Savings
$112.5002:17
- Description
This video provides step-by-step instructions for replacing the choke lever on Homelite leaf blowers.
All of the information in this choke lever replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit.
All of the information in this choke lever replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit.
Step By Step Instructions
1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Choke Lever Replacement
3
Tools Needed
4
You will need a T-20 Torx bit for this procedure.
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
Lift the tab to detach the air filter cover.
8
"Use a T-20 Torx bit to unthread the two mounting screws securing the filter base and carburetor, then remove the filter base."
9
Unthread the screw securing the choke lever to the choke plate and remove the old lever.
10
Install the new choke lever by positioning it on the air filter base.
11
Reposition the choke plate and thread the screw to secure the choke lever to the plate.
12
Insert the screws into the filter base then align the carburetor.
13
"Confirm the insulator gasket is in place, then position the carburetor and filter base and thread the screws to secure."
14
"Make sure the air filter gasket is properly positioned on the filter base, then realign the cover and snap it into place."
15
Reattach the wire and boot to the spark plug.
16
Congrats! Your leaf blower is ready for use.
Description
This video provides step-by-step instructions for replacing the choke lever on Homelite leaf blowers.
All of the information in this choke lever replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit.
All of the information in this choke lever replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit.
Step-By-Step Instructions
1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Choke Lever Replacement
3
Tools Needed
4
You will need a T-20 Torx bit for this procedure.
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
Lift the tab to detach the air filter cover.
8
"Use a T-20 Torx bit to unthread the two mounting screws securing the filter base and carburetor, then remove the filter base."
9
Unthread the screw securing the choke lever to the choke plate and remove the old lever.
10
Install the new choke lever by positioning it on the air filter base.
11
Reposition the choke plate and thread the screw to secure the choke lever to the plate.
12
Insert the screws into the filter base then align the carburetor.
13
"Confirm the insulator gasket is in place, then position the carburetor and filter base and thread the screws to secure."
14
"Make sure the air filter gasket is properly positioned on the filter base, then realign the cover and snap it into place."
15
Reattach the wire and boot to the spark plug.
16
Congrats! Your leaf blower is ready for use.
Applicable Product Model
Parts Needed
Lever
$0.57
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com