Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairHomelite Leaf Blower Intake Grille Replacement (521500011)
Homelite Leaf Blower Intake Grille Replacement (521500011)
Skill Level
Total Parts Cost
$1.85Estimated Savings
$112.5002:43
- Description
This video provides step-by-step instructions for replacing the intake grille on Homelite leaf blowers.
All of the information in this intake grille replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit, flat-head screwdriver, T-25 Torx bit.
All of the information in this intake grille replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit, flat-head screwdriver, T-25 Torx bit.
Step By Step Instructions
1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Intake Grille Replacement
3
Tools Needed
4
"You will need a T-20 Torx bit, a flat-head screwdriver and a T-25 Torx bit for this procedure."
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
Rotate the blower tube assembly counter-clockwise to detach it from the blower housing.
8
"Using a T-20 Torx bit, unthread the ten screws securing the blower cover."
9
Use a flat-head screwdriver to release the retaining clip to remove the cover.
10
Use a T-25 Torx bit to unthread the three mounting screws to release the old intake grille.
11
Install the new intake grille by aligning it on the blower cover.
12
Thread and tighten the mounting screws.
13
Reposition the blower cover and snap the retaining clip into place.
14
Rethread all of the screws.
15
Realign the blower tube assembly on the housing and rotate clockwise until the tube locks into place.
16
Reattach the wire and boot to the spark plug.
17
Congrats! Your leaf blower is ready for use.
Description
This video provides step-by-step instructions for replacing the intake grille on Homelite leaf blowers.
All of the information in this intake grille replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit, flat-head screwdriver, T-25 Torx bit.
All of the information in this intake grille replacement video is applicable to the following brands: Ryobi & Homelite.
Tools used: T-20 Torx bit, flat-head screwdriver, T-25 Torx bit.
Step-By-Step Instructions
1
Homelite Hand-Held Leaf Blower - Model UT09526
2
Leaf Blower Intake Grille Replacement
3
Tools Needed
4
"You will need a T-20 Torx bit, a flat-head screwdriver and a T-25 Torx bit for this procedure."
5
Make sure the engine has cooled.
6
Remove the wire and boot from the spark plug to prevent the engine from accidentally starting.
7
Rotate the blower tube assembly counter-clockwise to detach it from the blower housing.
8
"Using a T-20 Torx bit, unthread the ten screws securing the blower cover."
9
Use a flat-head screwdriver to release the retaining clip to remove the cover.
10
Use a T-25 Torx bit to unthread the three mounting screws to release the old intake grille.
11
Install the new intake grille by aligning it on the blower cover.
12
Thread and tighten the mounting screws.
13
Reposition the blower cover and snap the retaining clip into place.
14
Rethread all of the screws.
15
Realign the blower tube assembly on the housing and rotate clockwise until the tube locks into place.
16
Reattach the wire and boot to the spark plug.
17
Congrats! Your leaf blower is ready for use.
Applicable Product Model
Parts Needed
Grille
$1.85
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com