Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Trigger Replacement (C450000921)
Echo Leaf Blower Trigger Replacement (C450000921)
Skill Level
Total Parts Cost
$1.00Estimated Savings
$112.5002:32
- Description
This video provides step-by-step instructions for replacing the trigger on Echo leaf blowers.
Step By Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Throttle Trigger Replacement
3
Step 1: Unthread the retaining knob screw to release the throttle control from the blower tube clamp.
4
"Step 2: Use a T-27 Torx bit to unthread the four screws securing the two halves of the throttle control.
"
5
Step 3: Lift off the right half.
6
Step 4: Lift out the old trigger and detach the throttle cable.
7
Step 5: Prepare the new throttle trigger for installation by transferring the spring from the old trigger to the new one.
8
Step 6: Attach the throttle cable.
9
"Step 7: Keeping the spring depressed, align the trigger on the post."
10
Step 8: Confirm the wires and cable retainer are positioned in the channel.
11
"Step 9: Make sure the mounting pin is in place then realign the two halves of the throttle control and thread the screws.
"
12
Step 10: Reposition the throttle control in the blower tube clamp then thread and tighten the retaining knob screw.
13
Attention: You can rotate the throttle cable adjustment screw clockwise to increase tension on the cable or counter-clockwise to decrease the tension.
14
Congratulations! Your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the trigger on Echo leaf blowers.
Step-By-Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Throttle Trigger Replacement
3
Step 1: Unthread the retaining knob screw to release the throttle control from the blower tube clamp.
4
"Step 2: Use a T-27 Torx bit to unthread the four screws securing the two halves of the throttle control.
"
5
Step 3: Lift off the right half.
6
Step 4: Lift out the old trigger and detach the throttle cable.
7
Step 5: Prepare the new throttle trigger for installation by transferring the spring from the old trigger to the new one.
8
Step 6: Attach the throttle cable.
9
"Step 7: Keeping the spring depressed, align the trigger on the post."
10
Step 8: Confirm the wires and cable retainer are positioned in the channel.
11
"Step 9: Make sure the mounting pin is in place then realign the two halves of the throttle control and thread the screws.
"
12
Step 10: Reposition the throttle control in the blower tube clamp then thread and tighten the retaining knob screw.
13
Attention: You can rotate the throttle cable adjustment screw clockwise to increase tension on the cable or counter-clockwise to decrease the tension.
14
Congratulations! Your leaf blower should be ready for use.
Applicable Product Model
Parts Needed
Trigger
$1.00
Total$0.00
Related Articles & Videos
05:34
Part Replacement
Echo Leaf Blower Throttle Control Assembly Replacement (P021052251)
02:41
Part Replacement
Echo Backpack Leaf Blower Fuel Tank Grommet Replacement (13211555930)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com