Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Trigger Spring Replacement (V452001630)
Echo Leaf Blower Trigger Spring Replacement (V452001630)
Skill Level
Total Parts Cost
$1.90Estimated Savings
$112.5002:34
- Description
This video provides step-by-step instructions for replacing the trigger spring on Echo leaf blowers.
Step By Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Throttle Trigger Spring Replacement
3
"Step 1: Unthread the retaining knob screw to release the throttle control from the blower tube clamp.
"
4
Step 2: Use a T-27 Torx bit to unthread the four screws securing the two halves of the throttle cable.
5
Step 3: Lift off the right half.
6
Step 4: Lift out the trigger and detach the throtte cable.
7
Step 5: Remove the old spring if still intact.
8
Step 6: Install the new throttle trigger spring by inserting the hooked end into the hole then position the spring on the trigger hub.
9
Step 7: Reattach the throttle cable.
10
"Step 8: Keeping the spring depressed, align the trigger on the post. "
11
Step 9: Confirm the wires and cable retainer are positioned in the channel and make sure the mounting pin is in place.
12
Step 10: Realign the two halves of the throttle control and thread the screws.
13
Step 11: Reposition the throttle control in the blower tube clamp then thread and tighten the retaining knob screw.
14
Attention: You can rotate the throttle cable adjustment screw clockwise to increase tension on the cable or counter-clockwise to decrease the tension.
15
Congratulations! Your lead blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the trigger spring on Echo leaf blowers.
Step-By-Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Throttle Trigger Spring Replacement
3
"Step 1: Unthread the retaining knob screw to release the throttle control from the blower tube clamp.
"
4
Step 2: Use a T-27 Torx bit to unthread the four screws securing the two halves of the throttle cable.
5
Step 3: Lift off the right half.
6
Step 4: Lift out the trigger and detach the throtte cable.
7
Step 5: Remove the old spring if still intact.
8
Step 6: Install the new throttle trigger spring by inserting the hooked end into the hole then position the spring on the trigger hub.
9
Step 7: Reattach the throttle cable.
10
"Step 8: Keeping the spring depressed, align the trigger on the post. "
11
Step 9: Confirm the wires and cable retainer are positioned in the channel and make sure the mounting pin is in place.
12
Step 10: Realign the two halves of the throttle control and thread the screws.
13
Step 11: Reposition the throttle control in the blower tube clamp then thread and tighten the retaining knob screw.
14
Attention: You can rotate the throttle cable adjustment screw clockwise to increase tension on the cable or counter-clockwise to decrease the tension.
15
Congratulations! Your lead blower should be ready for use.
Applicable Product Model
Parts Needed
Spring
$1.90
Total$0.00
Related Articles & Videos
05:34
Part Replacement
Echo Leaf Blower Throttle Control Assembly Replacement (P021052251)
02:41
Part Replacement
Echo Backpack Leaf Blower Fuel Tank Grommet Replacement (13211555930)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com