Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Fuel System Kit Replacement (90158Y)
Echo Leaf Blower Fuel System Kit Replacement (90158Y)
Skill Level
Total Parts Cost
$47.02Estimated Savings
$112.5004:48
- Description
This video provides step-by-step instructions for replacing the fuel system kit on Echo leaf blowers.
Step By Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Fuel System Kit Installation
3
"Step 1: Make sure the engine has cooled and the on/off switch is in the ""off"" position."
4
Step 2: Perform this procedure with little or no fuel in the tank.
5
Step 3: Unthread the wing nuts counter-clockwise to detach the air filter cover.
6
Step 4: Remove the air filter.
7
Step 5: Use T-27 Torx bit to unthread the two mounting bolts securing the filter base and carburetor.
8
Step 6: Use pliers to help detach the throttle cable.
9
Step 7: Note the orientation of the fuel lines then detach them from the carburetor ports.
10
Step 8: Remove the fuel lines from the retaining bracket.
11
Step 9: Use a large flat-head screwdriver to help pry the grommet free of the tank to release the old fuel system assembly.
12
Step 10: Install the new fuel system kit components by inserting the fuel filter into the tank then push the grommet into place.
13
Step 11: Feed the fuel lines through the retaining bracket.
14
Step 12: Unthread the fuel tank cap and pull the retainer free of the tank.
15
Step 13: Pry out the old gasket.
16
Step 14: Position the new fuel cap gasket then reinsert the retainer into the tank and rethread the cap.
17
Step 15: Use a small phillips-head screwdriver to unthread the four screws to release the primer cover and remove old bulb.
18
"Step 16: Confirm the gasket, diaphragm, and primer body are aligned on the carburetor. "
19
Step 17: Insert the new bulb into the primer cover then align the cover and thread the four screws.
20
Step 18: Reinstall the carburetor by first attaching the fuel lines to the appropriate ports.
21
"Step 19: Hook the throttle cable onto the lever.
"
22
Step 20: Realign the baffle in the air filter base.
23
Step 21: Insert the bolts.
24
Step 22: Position the carburetor intake gasket on the bolts.
25
Step 23: Align the carburetor followed by the carburetor outlet gasket.
26
Step 24: Position the assembly and thread the mounting bolts.
27
Step 25: Replace the air filter.
28
Step 26: Realign the filter cover and thread the wing nuts to secure.
29
Step 27: Refill the fuel tank if necessary.
30
Congratulations! Your leaf blower should be ready for use.
Description
This video provides step-by-step instructions for replacing the fuel system kit on Echo leaf blowers.
Step-By-Step Instructions
1
Leaf Blower- Model PB580T
2
Leaf Blower Fuel System Kit Installation
3
"Step 1: Make sure the engine has cooled and the on/off switch is in the ""off"" position."
4
Step 2: Perform this procedure with little or no fuel in the tank.
5
Step 3: Unthread the wing nuts counter-clockwise to detach the air filter cover.
6
Step 4: Remove the air filter.
7
Step 5: Use T-27 Torx bit to unthread the two mounting bolts securing the filter base and carburetor.
8
Step 6: Use pliers to help detach the throttle cable.
9
Step 7: Note the orientation of the fuel lines then detach them from the carburetor ports.
10
Step 8: Remove the fuel lines from the retaining bracket.
11
Step 9: Use a large flat-head screwdriver to help pry the grommet free of the tank to release the old fuel system assembly.
12
Step 10: Install the new fuel system kit components by inserting the fuel filter into the tank then push the grommet into place.
13
Step 11: Feed the fuel lines through the retaining bracket.
14
Step 12: Unthread the fuel tank cap and pull the retainer free of the tank.
15
Step 13: Pry out the old gasket.
16
Step 14: Position the new fuel cap gasket then reinsert the retainer into the tank and rethread the cap.
17
Step 15: Use a small phillips-head screwdriver to unthread the four screws to release the primer cover and remove old bulb.
18
"Step 16: Confirm the gasket, diaphragm, and primer body are aligned on the carburetor. "
19
Step 17: Insert the new bulb into the primer cover then align the cover and thread the four screws.
20
Step 18: Reinstall the carburetor by first attaching the fuel lines to the appropriate ports.
21
"Step 19: Hook the throttle cable onto the lever.
"
22
Step 20: Realign the baffle in the air filter base.
23
Step 21: Insert the bolts.
24
Step 22: Position the carburetor intake gasket on the bolts.
25
Step 23: Align the carburetor followed by the carburetor outlet gasket.
26
Step 24: Position the assembly and thread the mounting bolts.
27
Step 25: Replace the air filter.
28
Step 26: Realign the filter cover and thread the wing nuts to secure.
29
Step 27: Refill the fuel tank if necessary.
30
Congratulations! Your leaf blower should be ready for use.
Applicable Product Model
Parts Needed
Fuel Line
$47.02
Total$0.00
Related Articles & Videos
05:34
Part Replacement
Echo Leaf Blower Throttle Control Assembly Replacement (P021052251)
02:41
Part Replacement
Echo Backpack Leaf Blower Fuel Tank Grommet Replacement (13211555930)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com