DescriptionThis video provides step-by-step instructions for replacing the maintenance kit on Echo leaf blowers.
Step-By-Step Instructions1
Leaf Blower- Model PB580T
2
Leaf Blower Maintenance Kit Installation
3
"Step 1: Make sute the engine has cooled and the on/off switch is in the ""off"" position."
4
Step 2: Perform the procedure with little or no fuel in the tank.
5
Step 3: Unthread the wing nuts counter-clockwise to detach the air filter cover.
6
Step 4: Remove the the old filter.
7
Step 5: Install the new air filter by positioning it in the air filter base then realign the cover and thread the wing nuts to secure.
8
Step 6: Unthread the fuel tank cap and pull the retainer free of the tank.
9
Step 7: Use a wire with a hooked end to pull the fuel filter out.
10
Step 8: Slide the retaining spring away from the filter then pull the old filter off of the fuel line.
11
Step 9: Install the new fuel dilter by attaching the fuel line then slide the retaining spring toward the filter to secure.
12
Step 10: Push the new filter into the tank.
13
Step 11: Reinsert the fuel cap retainer into the tank then thread on the cap.
14
Step 12: Remove the wire and boot from the spark plug.
15
Step 13: Use a 3/4 inch socket or a spark plug wrench to unthread the old plug.
16
"Step 14: Before installing the new spark plug, confirm the spark gap matches manufacturer's specifications. "
17
Step 15: Thread the new plug into the cylinder.
18
Attention: Be careful not to damage the plug by overtightening.
19
Step 16: Attach the wire and boot to the new spark plug.
20
"Step 17: Refill the fuel tank if necessary.
"
21
Congratulations! Your leaf blower should be ready for use.