Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairEcho Leaf Blower Spark Arrestor Replacement (14586206720)
Echo Leaf Blower Spark Arrestor Replacement (14586206720)
Skill Level
Total Parts Cost
$5.11Estimated Savings
$112.5003:48
- Description
This video provides step-by-step instructions for replacing the spark arrestor on Echo leaf blowers.
Step By Step Instructions
1
Echo Back-Pack Leaf Blower - Model PB580T
2
Leaf Blower Spark Arrestor Replacement
3
Tools Needed
4
You will need a T-27 Torx bit for this procedure.
5
Hot
6
Make sure the engine and muffler have cooled and the on/off switch is in the ?off? position.
7
Spill
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Use a T-27 Torx bit to unthread the four screws securing the starter.
10
Remove the wire and boot from the spark plug.
11
Unthread the five screws securing the engine cover.
12
Pry off the cover ? this may require some effort.
13
Set the leaf blower on its side.
14
Unthread the five screws to release the spark arrestor deflector from the muffler.
15
Remove the old spark arrestor.
16
Install the new spark arrestor by aligning it in the recess on the muffler.
17
Make sure the deflector gasket is in place, then reposition the deflector and thread the screws.
18
Reposition the engine cover, then thread and tighten the screws.
19
Reattach the wire and boot to the spark plug.
20
Realign the starter, making sure the pulley engages with the starter pawls.
21
Thread the screws to secure the assembly.
22
Refill the fuel tank if necessary.
23
Congrats! Your leaf blower is ready for use.
Description
This video provides step-by-step instructions for replacing the spark arrestor on Echo leaf blowers.
Step-By-Step Instructions
1
Echo Back-Pack Leaf Blower - Model PB580T
2
Leaf Blower Spark Arrestor Replacement
3
Tools Needed
4
You will need a T-27 Torx bit for this procedure.
5
Hot
6
Make sure the engine and muffler have cooled and the on/off switch is in the ?off? position.
7
Spill
8
Be sure to perform this procedure with little or no fuel in the tank.
9
Use a T-27 Torx bit to unthread the four screws securing the starter.
10
Remove the wire and boot from the spark plug.
11
Unthread the five screws securing the engine cover.
12
Pry off the cover ? this may require some effort.
13
Set the leaf blower on its side.
14
Unthread the five screws to release the spark arrestor deflector from the muffler.
15
Remove the old spark arrestor.
16
Install the new spark arrestor by aligning it in the recess on the muffler.
17
Make sure the deflector gasket is in place, then reposition the deflector and thread the screws.
18
Reposition the engine cover, then thread and tighten the screws.
19
Reattach the wire and boot to the spark plug.
20
Realign the starter, making sure the pulley engages with the starter pawls.
21
Thread the screws to secure the assembly.
22
Refill the fuel tank if necessary.
23
Congrats! Your leaf blower is ready for use.
Applicable Product Model
Parts Needed
Spark Arrestor
$5.11
Total$0.00
Related Articles & Videos
05:34
Part Replacement
Echo Leaf Blower Throttle Control Assembly Replacement (P021052251)
02:41
Part Replacement
Echo Backpack Leaf Blower Fuel Tank Grommet Replacement (13211555930)
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com