DescriptionThis video provides step-by-step instructions for replacing the oven light switch on Frigidaire electric ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Step-By-Step Instructions1
Frigidaire Electric Range - Model LFEF3054TFG
2
Electric Range Oven Light Switch Replacement
3
Tools & Assistance Needed
4
"You will need a quarter-inch socket or nut driver for this procedure, and you may need assistance."
5
Be sure to unplug the power cord or shut off the power supply.
6
Have an assistant help you to move the range away from the wall.
7
Use a quarter-inch socket or nut driver to unthread the screws to release the upper rear access panel.
8
"Note the orientation of the oven light switch wires, then disconnect them."
9
Depress the retaining tabs to release the old switch from the control panel.
10
Install the new oven light switch by snapping it into place in the control panel.
11
Connect the wires to the appropriate terminals.
12
Realign the access panel by placing the panel tabs behind the lip of the control panel.
13
Thread and tighten the screws.
14
Move the appliance back against the wall.
15
Plug the power cord back in or restore the power supply.
16
Congrats! Your electric range is ready for use.