DescriptionThis video provides step-by-step instructions for replacing the oven door hinge on Frigidaire electric ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Step-By-Step Instructions1
Before you replace an over door hinge on your electric range…
2
…be sure to unplug the power cord or shut off the power supply.
3
Fully open the oven door…
4
…and rotate both door hinge locks back.
5
Partially close the door…then lift and pull the door toward you to remove.
6
Set the door handle-side down on a towel or blanket.
7
Using a phillips-head screwdriver, unthread the four bottom screws securing the outer door panel.
8
Next, unthread the two upper screws securing the door handle and inner panel assembly.
10
Separate the inner and outer door panels.
11
You can now unthread the two screws securing the door hinge you’re replacing.
13
Install the new oven door hinge…
14
…by aliging it with the inner panel then thread the screws to secure.
15
Join the inner door assembly and the outer door panel together.
16
Realign the handle and fully thread the upper screws to secure it.
17
Replace the four bottom screws.
18
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
19
Lower the door to its fully open position…
20
…then rotate the hinge locks forward.
21
Plug the power cord back in or restore the power supply…
22
…and your electric range should be ready for use.