DescriptionThis video provides step-by-step instructions for replacing the oven door handle on Frigidaire electric ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Step-By-Step Instructions1
Frigidaire Electric Range - Model LFEF3054TFG
2
Electric Range Oven Door Handle Replacement
3
Tools & Assistance Needed
4
"You will need a phillips-head screwdriver and a towel or blanket for this procedure, and you may need assistance."
5
Be sure to unplug the power cord or shut off the power supply.
6
Fully open the oven door and rotate both door hinge locks back.
7
"Partially close the door, then lift and pull the door toward you to remove."
8
Set the door handle-side down on a towel or blanket.
9
"Using a phillips-head screwdriver, unthread the two upper screws enough to release the old handle."
10
"Install the new handle by aligning it on the outer door panel, then fully thread the screws to secure."
11
Reinstall the oven door by inserting the door hinges into the hinge slots at a forty-five degree angle.
12
"Lower the door to its fully open position, then rotate the hinge locks forward."
13
Plug the power cord back in or restore the power supply.
14
Congrats! Your electric range is ready for use.