Price Match Guarantee
In-stock parts ship the same day
365-Day Return Policy
Price Match GuaranteeGET PRO PRICING
Video & Articles: Appliance & Equipment RepairFrigidaire Gas Range Oven Sensor Replacement (316217008)
Frigidaire Gas Range Oven Sensor Replacement (316217008)
Skill Level
Total Parts Cost
$49.45Estimated Savings
$112.5001:29
- Description
This video provides step-by-step instructions for replacing the oven sensor on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver
Step By Step Instructions
1
Before you replace the oven sensor in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Depress the retaining tab to disconnect the oven sensor wire connector.
5
Using a quarter inch socket or nut driver, unthread the mounting screws securing the sensor to the rear panel and pull the old sensor out.
6
Install the new oven sensor by inserting it through the rear panel, then thread the mounting screw to hold it in place.
7
Connect the wire connector.
8
Move the appliance back against the wall.
9
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Description
This video provides step-by-step instructions for replacing the oven sensor on Frigidaire gas ranges.
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver
All of the information in this video is applicable to the following brands: Frigidaire
Tools used: Quarter-inch socket or nut driver
Step-By-Step Instructions
1
Before you replace the oven sensor in your gas range,
2
Be sure to unplug the power cord or shut off the power supply.
3
Have an assistant help you to move the range away from the wall.
4
Depress the retaining tab to disconnect the oven sensor wire connector.
5
Using a quarter inch socket or nut driver, unthread the mounting screws securing the sensor to the rear panel and pull the old sensor out.
6
Install the new oven sensor by inserting it through the rear panel, then thread the mounting screw to hold it in place.
7
Connect the wire connector.
8
Move the appliance back against the wall.
9
Plug the power cord back in or restore the power supply, and your gas range should be ready for use.
Applicable Product Model
Parts Needed
Temperature Sensor
$49.45
Total$0.00
Related Articles & Videos
Our Story
Family-owned and operated since 1912, Burke America Parts Group is the longest-running genuine appliance, HVAC, and outdoor power equipment parts solution in North America. At Repair Clinic, we're proud to be an international brand trusted by the pros as well as the DIY community.
About Repair Clinic
© 2026 RepairClinic.com